Freeze plugs?

[KcGsXrated]

Aliright, so im almost done rebuilding my 4g63t and I realized that I overlooked that Ineed freeze plugs still.

I had the machine work done at wags, (hot tanked, honed, reconditioned rods, new bearings pistons, rings ect...) Needless to say, does anyone know what plugs (just the 8?), if there are any other things that need to be put in?
I've never had a motor tanked before so im a little in the dark. What Size plugs, I belive they're either a 35 or 40mm.

I'm planning on going up to Brookdale since neither Advanced nor Napa carry the plus I need, unless I use a caliper (which I don't have).

Thanks for any help.

[niterydr]

Brookdale should have them, otherwise talk to wags, they should beable to set you straight.
Put a thin layer of RTV around the edge of the plug, and they do take a bit of effort to knock in.

[KcGsXrated]

Brookdale has them but I need to know how big they are, I dont have a caliper.

[DSMPARTSGURU]

you just need to come in and point out the ones you need....

cc

[KcGsXrated]

I belive that i just need the bigger 7 plugs ~ the water jacket plugs, i think thats all they pulled out anyway.

[KcGsXrated]

i live in Savage, and I dont have my license. I get it back thursday, but its my daily driver... I can try to get a ride out there tomarrow

[Outlaw1]

Shouldn't be too hard to measure them. 40mm = 1 9/16" and 35mm = 1 3/8" if you don't have a metric tape measure.

[cudvig]

thats a pretty big difference, you should be able to see that. its 5mm.

-Colin

[GVR-4579]

If you need i may be able to stop out there with my caliper. I am always going up that direction anyways. Let me know.

[KcGsXrated]

Thanks everybody, I got some ordered up, just need 4 more (only had 5).