PDA

View Full Version : 90 Tsi timing belt + related parts


Pages : [1] 2

larryr
08-22-2005, 11:32 PM
1990 Tsi
Need to do timing belt , what parts are suggested and cost....Thanks!!

-LR

Pimpin Dsmstyle
08-22-2005, 11:59 PM
read this forum a little bit... i just asked this yesterday

TGPilot
08-23-2005, 12:01 AM
Here you go...

http://www.vfaq.com/mods/Tbelt-checklist-pre.html
http://www.vfaq.com/mods/Tbelt-checklist-rem.html
http://www.vfaq.com/mods/Tbelt-checklist-inst.html

Go here... http://www.vfaq.com/index-main.html and click on "engine" and then scroll down to the "Timing Belt section".

Hope this helps...

-Kenny

DSMPARTSGURU
08-23-2005, 08:50 AM
figure out what you are looking for? if you need prices just please ask...

chris

TGPilot
08-23-2005, 10:29 AM
You only want to buy Mitsubishi parts!

DSMPartsGuru can by far give you the best deal! I got everything including balance shaft hardware for less than $250. At the dealer here they wanted nearly $400 for all the parts Chris supplied! :confused:

Jakey
08-23-2005, 02:30 PM
You only want to buy Mitsubishi parts!

DSMPartsGuru can by far give you the best deal! I got everything including balance shaft hardware for less than $250. At the dealer here they wanted nearly $400 for all the parts Chris supplied! :confused:

That's why Chris is Da Man!

DSMPARTSGURU
08-23-2005, 02:32 PM
obtw jakey ,, your parts went out today....

chris

larryr
08-24-2005, 11:10 PM
Hey Chris, before I do the tb, I need to pull my valve cover off, neeed new valve cover gaskets
(all 6 - valve cover, 4 spark plug hole, and cam bore half-moon plug)

per vfaq, and how much do lifters run through you ?


Thanks in advance,

LR

DSMPARTSGURU
08-25-2005, 09:08 AM
Lifter $30.38 Ea
Valave Cover Gasket $21.34
Spark Plug Seals $3.86 Ea X 4
End Seal $2.06

Chris

larryr
08-25-2005, 06:12 PM
All in stock? do you have to be there for me to get this price ? and what time doest the parts dept close tommorow.....?

Do u carry the reinforced vacuum lines that go from the boost controller to the turbo ?

Thanks again..

-Larry