Intake Cam tapping?

[Enes]

Where should i take my HKS Cam to get tapped for the CAS bolt.

HKS suposedly don't come tapped unfortunately ;( otherwise i'd have it installed now and running.

Or also what size is it?

-E

[Shane@DBPerformance]

I have had Motors by Gosh and the St. Louis Park NAPA do it before. Mike at QPR might be capable of doing it will all his equipment. I usually just take the bolt from the CAS to the machine shop with the cam.

[Nash]

I had mine done at the St. Louis Park Napa also.

[Enes]

The one on Lyndale?
3610 Lyndale Ave S
Minneapolis, MN 55409
Tel: (612) 827-2561


or

7400 West 27th Street
Minneapolis, MN 55426
Tel: (952) 925-0188

or

1842 Main Street
Hopkins, MN 55343
Tel: (952) 938-3517

[niterydr]

If it just needs to be tapped, we can do that here, give us a call tommorrow E man, or swing by before 6 and we'll take care of it.

[Enes]

it does need to be drilled even more..

[niterydr]

We can still probably do it. Just bring by the bolt and cam and we'll beable to figure it out (if we can or can't) real quickly.

[Onefast99gsx]

It's pretty easy. My brother whom is a machinist did mine. Drilled it in a lathe and tapped it out manually. If you know anyone who has a lathe, you're set. All we did was wrap mine with this plastic mesh sheathing material they use for shipping. That way the lobes and the cam cap surfaces wouldn't get damaged.

[niterydr]

Yeah, only problem is our lathe is super tiny (9" diameter by 20" long work area).

[Onefast99gsx]

Josh- we didn't need the large work area. Can you place items further back into the chuck, if you know what i mean? Our chuck we had on was probalby only 10-12" diameter but that didn't matter nor did the size of the work area. We only had about 1+" actually sticking out of the chuck. The rest was back in further. Just used a dial indicator for straightness dialin and drilled away.