Evo 02 housings

[niterydr]

If the aftermarket downpipe bolted on to the factory 02 housing, then this will work just fine.

[Halon]

Looks sweet Josh! Any plans to do anything similar to those but with an external dump?

[niterydr]

Blah, these should flow just fine for 95% of the internally gated turbochargers. There is quite a leadtime on the dsm units. The foundary is finishing up a batch of 50 shortly, and they should be saled priced upon release. Its good that they are backordered, gives us plenty of time to test the unit on Ryan's Gvr4.

[Halon]

Oh I'm sure they flow fine, I just like the sound of the dump!!

[Halon]

Bringing back the dead thread!!! Your site says these are on sale for $180. Do these come with any sort of studs for the downpipe side flange? The one thing I don't like about the aftermarket O2 Housings I'm looking at, is they all just have holes. I am looking for one with studs because it just makes lining up the downpipe on there so much easier. Just put the down pipe up there and screw on the nuts. It's a PITA when I'm all by myself, trying to line up the holes, stick a bolt through, hold the downpipe up and, well ya it just pisses me off. If they do come with studs, and they are still on sale for $180, then put me down for one, and I'll come pick it up tomorrow if possible after I get off work. I'm sick of my POS, Stainless (yet rusty), RnR one.

BTW, it's the 2.5" DSM one I want.

[slowbubblecar]

If it doesn't, you could always have someone weld a bolt into it through the hole.

[tim]

I would like to know if they have studs too. Also, what is the distance (center to center) of the studs? I have Nash's old DP and it is a 2.5" collector that quickly transitions to 3" so you cant get the nuts on with a 2g o2 housing. If the bolt spacing is wider than stock I might have to pick one up too since I really cant afford a tubular and would really like to get this exhaust put on.

[niterydr]

Back from my trip.
These are actually going back to retail pricing $259.95 as of monday, but for those on this thread, before my post (aka brandon and tim) I'll honor that $180 price.
They have studs on the bottom and the stud spacing is roughly 4" with a 2.5" outlet. We've only had one issue with these, and that was on a stock 1g downpipe. Everything else that has bolted together hasn't been a problem. They were designed to be a 100% bolt-in.
The sale is off because we've burned through our promo amount, aka we are out of stock. I have 2 more units coming in sometime this week, and then I'll be out of stock for sometime. (probably a few weeks as the manufacture wasn't anticipating us moving this many units).
These are for the dsm 02 housings we are speaking about obviously.
Thanks all for the inquiry.

[Halon]

Will do! How late you guys going to be around on Monday? I get off around 4 and head there right after work if you guys are going to be around. Thanks for the responce and honoring the price, I appreciate it a lot! Just gotta get this thing to quit freaking knocking and I'll have to get it up on that dyno.