PDA

View Full Version : MCCC stuff? suggest it?

Enes
06-28-2005, 02:31 PM
http://vfaq.com/mods/MCCC.html

would you gearheads suggest doing the mccc stuff before i swap the cams in?
to clean up the head and crap as best as possible without taking it all apart..

-e
Onefast99gsx
06-28-2005, 03:22 PM
I've used it and it works great. If you can't find it(in which you should be able to), you can use Seafoam. I'm not sure which which is stronger of the two as i've only used MCCC. Car smokes like a MOFO and you'll have to play with the throttle to keep it running.

Suggestion: Use a shit set of plugs if you have good ones in it.
Enes
06-28-2005, 03:31 PM
where did you squirt it throu?
it would seam best throu one of the ports on the throttle body...
Onefast99gsx
06-28-2005, 03:53 PM
Yep, that's exactly where i did it from. Just pulled one of the hoses off that goes to the throttle body. I can't remember which hose but any one that sucks air in, which i believe they all do.
Jakey
06-29-2005, 10:24 PM
I believe this is the stuff Barton used when he had his continual knock problems.

http://www.dsmstyle.com/forums/showthread.php?t=1331&highlight=MCCC
Enes
06-29-2005, 11:26 PM
cool sounds like a magical stuff ;p
john
06-29-2005, 11:48 PM
I used it on my car to clean carbon off the piston tops. I just poured it into the spark plug holes, let it sit overnight, modified a shop vac hose to go in the holes and suck as much as I could out, used engine flush and did an oil change afterwards. It did run like crap until it was all burned out but it helped.
Alpine TSi
06-30-2005, 06:56 PM
I used it on my car to clean carbon off the piston tops. I just poured it into the spark plug holes, let it sit overnight, modified a shop vac hose to go in the holes and suck as much as I could out, used engine flush and did an oil change afterwards. It did run like crap until it was all burned out but it helped.


I thought it said right on the bottle for most Engine Flush like products not to use them on turbocharged engines?

And isn't MCCC supposed to be used on an engine that is running?
john
07-01-2005, 12:58 AM
Didn't read the instructions off the bottle, just off the internet.

Yes and no. Cleaned out some with the engine running through the pcv hose. Cleaned out most with the engine off spraying straight into the cylinders.
john
07-01-2005, 01:00 AM
I believe this is the stuff Barton used when he had his continual knock problems.

http://www.dsmstyle.com/forums/showthread.php?t=1331&highlight=MCCC

Read my post on here. It is more educational.