Log in

View Full Version : Girlfriends Turbo Project underway

Pages : [1] 2 3
2003eclipse
04-05-2005, 01:00 AM
After putting it off for well over a year Finally got my ass in gear and going on it. She owns a 95 Honda Del Sol with a D16Z6 or some shit like that. I know it as a SOHC VTEC. In about 3 hours Got the front mount mounted and fit, Manifold and turbo bolted up, injecters are in, this that and the other thing.
So far all thats left is poor mans stand alone. Fuel Pressure regulator Running oil lines, coolant lines, exhaust, gauges.

Anyone Know much about Turbo Edit? Where to find what other maps people are using for this style setup?
Shane@DBPerformance
04-05-2005, 10:13 AM
Isn't Turboedit for OBD0 applications? A 95 should be OBD1.
LightningGSX
04-05-2005, 05:24 PM
You want UberData or Crome, which are rom editors.You can use also EcuControl which, I believe, is realtime like DSMLink, but I don't know much about it.I'll check into it for you

http://uberdata.pgmfi.org/
http://www.pgmfi.org/twiki/bin/view/Library/WebHome

EDIT: Here's the link for Crome http://www.radicalperformance.com/download/
LightningGSX
04-05-2005, 05:27 PM
Bring me the ECU, I'll put a socket and the octal latch you need in it.And I have the EEPROMs you need
Swifty1638
04-05-2005, 07:40 PM
I got a few friends with programmers, that can get you an ecu..i believe it's a p-06 ecu, from a civic, with basemaps loaded on it for a turboed car. You can also have the rev limiter removed, the launch control added, and some other neat stuff. We used it a lot for the f-series motors in the hondas, but perhaps it could work with your setup?

-A. Swift
ACRucrazy
04-05-2005, 09:11 PM
Hehehe, Did I get her on your ass to finish that?
Or was my comment the other night just a little fuel on the fire?
MATCHBX
04-05-2005, 09:13 PM
Doesn't Z-dyne have an ecu (or a program) for a turboed sol engine? Isn't the gold one fully programmable?
Shane@DBPerformance
04-05-2005, 10:11 PM
Just do Uberdata.
2003eclipse
04-06-2005, 12:17 AM
Yeah I found out uberdate is the way to go. ACRUCRAZY thanks for the motivation factor. She is shitting her pants hearing about the progress. Got the oil return hooked up into the pan oil feed hooked up fuel pressure regulator B&M that wasn't as cheap as i wanted it to be. fuel pressure gauge. What exactly do the Stock T25 wastegates run?
Eric can you find other peoples maps that have the same setup out there and go with those?
IndiEP
04-06-2005, 12:31 AM
http://www.xenocron.com/bins/
This'll help ya.