PDA

View Full Version : Installing the MAF-T 2.01

DeAdGnRaTiOn
03-02-2005, 07:33 AM
It looks like it is just plug and play but there are 2 loose wires. A white wire and a blue wire with the tips pre-spliced. What do I do with these 2?
scheides
03-02-2005, 09:07 AM
wite wire goes to rpm signal (wite wire coming off CAS is a good lead), the blue wire is the aux lead, if you want to make adjustments for when you're running h2o or n2o injection.
LightningGSX
03-02-2005, 09:09 AM
IIRC the white is the RPM signal, which connects to the CAS and the blue is an AUX of some kind

EDIT: Scheides beat me to it.
DeAdGnRaTiOn
03-02-2005, 09:17 AM
lol, thanks alot guys!
scheides
03-02-2005, 09:23 AM
ha!
DeAdGnRaTiOn
03-02-2005, 09:59 AM
Will there be a blue wire off the CAS that I can splice in to..or what should I be looking for?
scheides
03-02-2005, 01:36 PM
White wire off the CAS...solder that to the white wire on the maf-t. leave the blue wire alone, tape it off.