Cam Cap Bolt Torque Spec

[Nash]

Any one know torque spec for the cam cap bolts for a 2.0 head?

[john]

18 ft/lbs is what I believe. Saw theM torqued at QPR.

[joem]

18 is right sir.
joe

[Goat Blower]

Torque 'em til they snap, use the big breaker bar.
:goodluck:

[john]

Originally posted by Goat Blower@Sep 1 2004, 06:23 PM
Torque 'em til they snap, use the big breaker bar.
:goodluck:
You do not need a breaker bar to snap them. All you need is a 3/8 drive ratchet. Trust me on this one...

[Nash]

14-16lbs is what I found.

Originally posted by Goat Blower@Sep 1 2004, 05:23 PM
Torque 'em til they snap, use the big breaker bar.
:goodluck:
Yeah, I did that. I wasn't using a breaker bar, but I did break one. Lucky Jet is a nice guy and fixed if for me.

[niterydr]

just jump on them ;), they'll go.

[Nash]

Originally posted by niterydr@Sep 1 2004, 07:31 PM
just jump on them ;), the'll go.
HAHA! Finally I don't have to do that to get the head on!

[Shane@DBPerformance]

I always use 14ft-lbs.

[Nash]

I used 15ft-lb, but if I can't get this fucking car back together with out anymore problems I'm gonna torch it!