Log in

View Full Version : Leak?


Pages : [1] 2

JiN
07-11-2004, 04:26 PM
Ok, so I swapped out my IC piping for some hardpiping. I wasnt planning on keeping it in there, just testing things out. So I take out the hardpiping, and put back in my stock stuff. With the stock piping back on, my car is like, struggling to stay on. It will either Struggle for a little while, and maybe eventually die. Or it will idle surge for a little while. Yet when I normally drive, it rides like normal. No big loss in boost pressure either. Any ideas? thanks everyone. :)

unreal808
07-11-2004, 04:41 PM
check for a leak after your MAF. thats all I got. :goodluck:

TheBlizzard
07-11-2004, 05:39 PM
Rick, check all your connections of the stock IC piping. And check to make sure you don't have a vacuum line off somewhere. Sounds to me like you have a boost leak somewhere, or something isn't connected.

CRAIG

john
07-11-2004, 05:41 PM
I would say boost leak or MAS plug is disconnected.

JiN
07-12-2004, 11:47 AM
Would a shitty throttle body gasket cause all this? I can also hear a small hiss, coming somewhere around the tb and stuff.

Khadgar
07-12-2004, 12:21 PM
Do a boost leak test, might be easier to locate the leak with the engine off.

JiN
07-12-2004, 01:31 PM
Ok, I checked my connectors and shit. I dont think I'm missing any. It must be a boost leak somewhere. I'll have to hit up QPR and get it worked out. Thanks a lot guys, if you come up with anything else, lemme know.

Enes
07-12-2004, 01:35 PM
yeah i'm going to be doing a boost leak test on my car tonight.. just to make sure ....

-E

JiN
07-13-2004, 01:19 AM
E, you have your own kit for that?

Iceman
07-13-2004, 04:41 AM
Originally posted by JiN@Jul 13 2004, 12:19 AM
E, you have your own kit for that?
I think a lot of us do.... http://www.vfaq.com/index-main.html --> Intake --> Intake leak tester. Good luck.