Dsmstyle.com Dyno Day July 31st!

[santa]

Originally posted by DSMStyle@Jun 30 2004, 10:48 AM
I guess that's up to the guys at Elite. It's been done before, and I know we have a few FWD guys that would definatly lay some smoke, but I am not sure how good of an idea that is.
I'm down my motot's got 1500miles on her now shes ready for some smoke....

[ABV]

:bowdown: RWD burnout. :lol:

[v8klla]

Bad news, Looks as if the person who is supposed to be building my downpipe is going to back out. So that leaves me to do it on my own lol. I don't see how I will get it built and break in the motor and clutch by dyno fest. Sorry for the inconvenience guys...

Chris

[Shane@DBPerformance]

Dyno Day Rules and Info:

If you are dynoing an AWD, you need to have the VC in and transfer case removed before you enter the shop. Bring your own tools to drop the downpipe/transfercase in the parking lot, if needed. Bring some bungie cords or wire to tie up your driveshaft.

You will be driving your own car on the dyno during the pulls. Drive it onto the lift/dyno rollers, we will strap it down and hook everything up while you wait in the car. We will run the dyno controller, unless you really want to. The way it works is that we release the dyno brake, you casually get the car up to 4th gear and hold it at about 2000RPMs. When you are ready to make a pull, let me know and I will hit the sample button while you floor the gas and hold onto the steering wheel tight. Make the pull up to redline or revlimiter or how ever high you want to take it and let off the gas and put it into neutral. I will hit the dyno brake and the car will come down to a stop.

[Enes]

i won't be doing nothin with the dsm... the trany is 1/2 way out and on the way to shep....

-E

[AJ]

Thanks for the specifics Shane.

[JET]

I got dibs as the last car on the dyno! :D :bounce:

[Enes]

i should dyno the truck maybe?

-E

[AJ]

Originally posted by Enes@Jul 28 2004, 02:25 PM
i should dyno the truck maybe?

-E
No, just leave it hooked up the trailor and be ready. LOL

[john]

Is there a dyno order yet? I don't want to spend the whole day there.