2002 Mirage Coupe Swapped Evo 4g63t

[Boostedls]

Hey guys! I thought I'd throw my build on here to see what u guys think. It's a 2002 Mitsubishi Mirage LS Coupe. I've had the car for a couple years now but I finally decided to go ahead with the build. After I sold my Evo8, I decided to start my Mirage build. Since I had a bunch of parts collecting dust I figured why not. I scored on a mirage parts car that the previous owner had done a bunch of stuff done on. So I picked it up and salvage whatever I could.

I'm not done yet but I'm awfully close. A lot of sweat, blood, and tears.

Here's a parts list:

Engine:
Tomie 272 Camshaft
Dual Valve Springs
AC&PS Delete
BS Delete
Wiseco Pistons
Eagle Rods
HAFE Manifold
Garrett GT3076R
Megan Downpipe
Stainless Steel Oil Lines
Kinugawa Water Lines
TiAL 44mm Wastegate
TiAL Q 50mm BOV
Omni 3bar Map Sensor
Jdm Sti 565cc
Aeromotive FPR
DW340lp Fuel Pump
Evo 4 Transmission
ACT Clutch Monoloc
XTD 6puck Clutch
MAP Clutch Fork Stop
STM Stainless Steel Clutch Line
Evo 8 Slave Cylinder
VR4 1 1/16 Brake Master Cylinder
STM Oil Cooler and Thermostat Delete
TRE FWD LSD Transfer Case
Evo 4 Aluminum Radiator
Evo 4 Radiator Upper Mounts
Misimoto Upper Radiator Silicone Hose
Evo Intercooler

Interior:
Evo 6 JDM Recaro Seats
AEM Digital Boost Gauge
AEM Digital WideBand

Exterior:
Stock for now

Suspension:
5 Lug Swap
Evo 4 Knuckles
Evo 8 Brembo
Evo 8 Rotors
Evo 8 Control Arms
Evo 8 Front Sway Bar
Technica Stainless Steel Brake Line
Mirage Non-PS Manuel Steering Rack
Ralliart Trailing Arms
Custom Toe Arms
Megan Camber Arms
Whiteline Rear Swaybar
ASR Subframe Brace
Beaks Lower Tie Bar
Aluminum LCA
Cusco Rear Strut Bar
KYB AGX
H&R Springs

Wheels:
Evo 9 SE BBS 17x8

Things I still need to do:
Custom intercooler pipings
Weld and install IAT bung to run speed density
Weld WideBand bung
Custom axle back
Wirings
Ecu flash
Tune

Before: stock 1.8 4g93 t25 turbo
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpswuyk484d.jpeg (http://s307.photobucket.com/user/20mirage00/media/Mobile%20Uploads/image_zpswuyk484d.jpeg.html)

Parts car next to My coupe
http://i307.photobucket.com/albums/nn320/20mirage00/IMG_0775_zpsgp6qrk0b.jpg

Some random pictures over the years:

Removed the PS components and rack and replaced it with a Mirage non-powerseteering rack
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsmkapk0d9.jpeg

Started on the EVo 5 lug front Brembo swap and Stainless steel brake lines
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zps8p507lha.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpspdezmdj5.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsjs7r7nts.jpeg

Upgrading the stock Master Cylinder to utilize the bigger brakes
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsl3kjriow.jpeg

Removing and replacing the stock Mirage trailing arms with 04-06 ralliart. Sadly I won't be running Brembos for the rears unless I get a custom bracket made.
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsgw2trszd.jpeg


Installing my Kyb AGX with H&R springs
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsggekw01f.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsel6shphn.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsfgwoako3.jpeg

Rear end since I'm not going AWD anytime soon
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zps2vkhiesa.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsh4dg9twh.jpeg

Dropped my gas tank and installed my DW340lp Fuel Pump
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsccffi7bb.jpeg

I picked up these JDM Evo 6 Recaro seats form Iowa
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zps79lye1kn.jpeg

Straight bolt in no modification required.
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsfhe53fiy.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsjwvvd0sq.jpeg

Picked these up these gauges at DB to go along with the interior
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsei9easgm.jpeg

Started getting the motor ready to drop in. Don't be confused, that was the g64 eclipse trans I was going to used to stay fwd instead I picked up the modded transfer case so I can utilize the Evo trans.
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsgz2aypol.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpswhiqke7t.jpeg

Turbo setup I'll be going with for now. Garrett gt3076r
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsfnlo7gep.png

Dropping the motor in
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsorabhjee.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpspvklvywk.jpeg

Installing my modded TRE transfer case
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsbshogoc3.jpeg

Installing the stock Mirage crossmember and Evo axles
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpslnqocooa.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zps8rrswcf5.jpeg

This is its most current state
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsm4n6zjf2.jpeg
http://i307.photobucket.com/albums/nn320/20mirage00/Mobile%20Uploads/image_zpsjbmscpme.jpeg

It's different but I hope u guys like it! Plan is to get it done and ready to roll out by spring time.

[C3L1CA]

Awesome build! It'll be fun to watch

[Boostedls]

Thanks much appreciated

[TkrPerformance]

Always looking good

[Boostedls]

Thanks Mark!

[DSMINMN]

Like myself some swapped CSMs.

[turbotalon1g]

Damn, that thing has got to fly. Very badass using the evo motor

[Boostedls]

I'm hoping it does lol. Thanks guys

[Goat Blower]

You did that all in your driveway? Neighbors must love you. :D

Looks good, love these projects.

[Boostedls]

Lol. Very surprised I never had any problems. Nice elderly neighborhood too.

Thanks