CV axle nut really stuck, need help asap!!

[mitsukid124]

It isn't on a DSM but I figured someone might have a trick. I have tried propane and mapp gas to heat it up. I've broke two 1/2" drive ratchets. Bent the crap out of a cheap cheater bar. Shattered the head of a thicker cheater bar. An electric impact didn't do anything. Used lots of pb blaster.

I dont have air tools and really dont want to fork out $150 to buy acetelyne and oxygen and rent a torch.

Does anyone have any other idea's? I'm stumped.

[b00sted_spyder]

Breaker bar with 5 foot thick long pipe should do the trick.

[mitsukid124]

I tried that and it snapped the 1/2" drive part at the socket.

[93gtpeater]

Put some heat on that bitch...... Or buy real tools. Lol

[Goat Blower]

Take a die grinder and cut the nut.

[mitsukid124]

I will have access to a full shop tomorrow that has an oxy- acetelyne torch and air tools. So I'll see if that helps. I currently have nothing bigger than 3/8" that isnt broken from various attempts haha.

[asshanson]

I had a stuck axle nut, broke my craftsman 1/2 18" breaker bar, got warranty replacement because of an obvious mfg defect, got a new one plus 5' extension pole and got the nut off just fine.
Good luck.

[JET]

Careful with the Oxy torch, I use a MAPP torch and it works good. Throw some heat at it and then grab the impact and off she comes.

[twack]

should have hit me up cole you know i got toys

[dsmreck]

impact