My gsx project

[M1L3S]

I figured I would finally make a project thread. I've met a lot of you guys while working on this car. it has been a uphill climb all the way. I found the car in Milwaukee. the guy had it for sale for around 2500. he had it "painted" took the engine out to do the timing job, then never was able to get it running so he decided to sell it. [/LEFT]
turns out his "mint no rust" description was far from the truth.
I ended up picking it up for 1200$
it came with:
3 turbos.
wideband
3 inch exhaust
what made me want the car was it was mostly untouched and from the pictures looked a lot cleaner then what it was in person.
so I sold my old rust free 99 gst. kept the 2.3 motor (eagle rods/cp pistons)

would love to hear your guys comments and tips and tricks

[M1L3S]

my old gst http://i1287.photobucket.com/albums/a631/M1L3S/1480_zpscc2cfb5f.png

http://i1287.photobucket.com/albums/a631/M1L3S/1479_zps5e8f5de7.png

[M1L3S]

began the tare down and process to paint my gsx. all I had to do to get that motor running by the way was reconnect the starter relay :)

http://i1287.photobucket.com/albums/a631/M1L3S/2200_zps2ffd16eb.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/2209_zps48625c50.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/2211_zpse9188d14.jpg

went with 2 stage. all in all was 188$ shipped to the door.

http://i1287.photobucket.com/albums/a631/M1L3S/2222_zpsc04efc6f.jpg
that's the finished product.

then the very next day, the unthinkable happened! http://i1287.photobucket.com/albums/a631/M1L3S/2246_zpsb902609f.jpg

[M1L3S]

I found a 420 rs that was t boned, pulled the hood and leather interior and a few misc parts.

started gutting out the gsx
http://i1287.photobucket.com/albums/a631/M1L3S/2164_zps0d09eadc.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/2165_zps156a5d84.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/2170_zps61994440.jpg

I can not stress enough how much of a budget build this was! every part that was used or swapped or anything that was purchased was all because of selling and trading my collection of parts and misc things I had. theres a lot of things i wish i could of done better or differently , but money was a huge factor :/

[M1L3S]

while installing the interior I decided on cutting a couple inches off of my shifter

http://i1287.photobucket.com/albums/a631/M1L3S/20140612_205609_zps3ef071ce.jpg

I actually really like how it turned out, its a bad angle, but it is a lot shorterhttp://i1287.photobucket.com/albums/a631/M1L3S/20140612_220812_zps156273b0.jpg

[M1L3S]

swapping in the dash was not as hard as I thought it was going to be.(before i painted the car, door jams are now black as well)http://i1287.photobucket.com/albums/a631/M1L3S/2184_zps1abe7be4.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/1882_zps6986082e.jpeg

I dyed the carpet black as well. this is a pic of the interior before i pulled it.http://i1287.photobucket.com/albums/a631/M1L3S/1880_zps87c9801c.jpeg

[M1L3S]

I also redid the headliner

http://i1287.photobucket.com/albums/a631/M1L3S/2182_zpsc7da0f61.jpg

[M1L3S]

one of the coolest things I did to the car was using the empty fog light holes to route extra air to the radiatorhttp://i1287.photobucket.com/albums/a631/M1L3S/20140713_160707_zps580c5c30.jpg

I did this on both sides.(like I said before, "budget build") http://i1287.photobucket.com/albums/a631/M1L3S/20140713_160651_zps85f49756.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/20140713_160641_zps82a1e188.jpg

[M1L3S]

some more ghetto rigging :P

Ended up losing my reservoir tank and crazy enough a Gatorade bottle is the same size and seals wellhttp://i1287.photobucket.com/albums/a631/M1L3S/20140722_1402041_zps01342930.jpg

spent a lot of time in junkyards to get parts and things for this build. today saw something I thought I would never see at the junkyard! http://i1287.photobucket.com/albums/a631/M1L3S/20140724_152313_zps6d0d64f0.jpg

they were hanging out wanting to shoot a video of some kind in the yard,

[M1L3S]

time for some carnage!!!!!

I had this 2.3 for awhile and already rebuilt it one time before(spun a bearing at db)

well a buddy of mine was giving me a hand with my car and we needed to jack it up, he put the jack on what he thought was the front engine mount support.

long story short the intercooler was pushed and damaged and caused metal to go through the intake. http://i1287.photobucket.com/albums/a631/M1L3S/20140620_154050_zpscf7028b1.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/20140620_155550_zpsd29e3cba.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/20140617_160323_zps1425ca3c.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/20140617_1603021_zpsf8790431.jpg

http://i1287.photobucket.com/albums/a631/M1L3S/20140617_160210_zps420ff414.jpg