Where does this sensor go?

[mitsukid124]

I am almost done putting my car back together after having the head off. I cannot figure out where this hooks up to. I know it is the cam position sensor and it sits behind the intake cam, but I have no idea where the connector plugs into.

Please help! Im hoping to get this running asap.


Thanks,
Cole

[mitsukid124]

I think it might have been on there still from when the previous owner put a JDM engine into it. It has the CAS on the passenger side of the intake cam and that is actually hooked up.

So my question now is, do I even need this?

[TkrPerformance]

If you have a 1g cas you do not need that one

[mitsukid124]

This is a pic of what I believe is a cam position sensor that is on the passenger side of the intake cam.

mark can you confirm this for me or not?

[TkrPerformance]

That's a 97-99 cas.

[mitsukid124]

So then I need both? the other one feeds the ecu ignition timing right?

[TkrPerformance]

You need the 97 cas and the crank sensor
Or
95-96 cas behind the cam gear and crank sensor.
Just depends in the cas plug on the harness 95-96 or 97-99

[mitsukid124]

ok, that makes more sense, now I just have to find where the cas behind the cam gear plug into. I see nothing that has a square plug.

[mitsukid124]

Is anyone with this style plug (from the original post) able to chase the wires in their car and see where it connects to and where that connector is located?

[scheides]

PIITB!