PDA

View Full Version : Front Mount Suggestions

Pages : [1] 2
wildman38
04-16-2014, 11:12 PM
I am looking at upgrading my front mount, I have a smaller long route ets kit at the moment, I am putting a 2gb talon front bumper on soon so I would prefer not to trim an extreme amount off of that. The two in which I have been looking into are the vrsf short route kit, and a punishment racing kit, which I believe is long route. Just trying to see what you guys would suggest for me to get. I am running an evoIII 16g, soon to be tuning to e85 with 1200cc pte's, am running speed density with a 6 bolt and will be putting a new ported/polished head with 268 cams in. Do have link aswell.

Any suggestions between these two kits or even another brand would be greatly appreciated
TkrPerformance
04-16-2014, 11:25 PM
Vrsf
wildman38
04-16-2014, 11:28 PM
Did you run it on your talon Spyder?
TkrPerformance
04-16-2014, 11:33 PM
I have installed alot of them. They fit great. On my Spyder I am running a kinetic racing fmic (sbr also sold it as there's in the US) did alot of cutting to get it to fit with the 2gb talon bumper.
wildman38
04-16-2014, 11:38 PM
Alright. I was leaning more towards vrsf. So if I understand you correctly I won't have to cut much for that one? I know I have to either remove or modify the crash beam which I am fine with, just want it to look good and perform better
TkrPerformance
04-16-2014, 11:44 PM
Just cut up the crash beam. Bumper need minor trimming. Going to get the same fmic and put on the Evo 3 since I sold off all the big top mount big power crap to go back street set up.
wildman38
04-17-2014, 12:19 AM
Alright cool. Thank you sir!
goodhart
04-17-2014, 12:30 AM
VRSF. Also ditch the PTE 1200's if you're using e85. I know Shane has had all kinds of issues with them on e85. If they are the newer 1250's you should be good
turbotalon1g
04-17-2014, 07:10 AM
ETS, perfect fit and great performance both cooling air temp and flow thru for getting air to the radiator.
wildman38
04-17-2014, 07:41 AM
Does ets make any bigger of kits though? Like I said I have an ets and it is quite small. Part of me feels like it won't be enough for the things I'm going to be doing to it.

About the pte's, really? I haven't heard that, I will start looking into a different set. Thanks for the info on that!