PDA

View Full Version : Valves

mark4g63t
08-23-2013, 10:10 AM
In need of a full set of valves. std size only. lmk what you have.
NEED ASAP!!
Mark
mark4g63t
08-23-2013, 10:17 AM
Head is at the machine shop and just needs a new set of valves. last set one valve was a different size. Need to make the cookout!
golden763
08-23-2013, 01:34 PM
Just stockers?
DSMINMN
08-23-2013, 02:25 PM
If stock would cut it I should have some. If not I suggest these:

http://www.ebay.com/itm/4G63-stainless-valves-stock-size-H-P-Eclipse-Eagle-DOHC-2-0L-EVO-DSM-/390647451427?pt=Race_Car_Parts&hash=item5af4670f23

Cheap and a lot of people like them. There are a few with 8xx+ hp with those too.

Edit: If you're wanting to have the car at the Cookout I'm probably of no help.
mark4g63t
08-23-2013, 03:42 PM
Ended up grabbing a complete head from cornfed and found a valve that will work for my other head. All is good now! Just have to decide which head to use/ build.
goodhart
08-24-2013, 01:39 AM
If you have a 2g head I would use that.
mark4g63t
08-24-2013, 11:14 AM
They both are 2g heads. I'm about to put it on then will have some questions about timing belt installation.
Thanks guys!