Log in

View Full Version : joel's build

Pages : 1 2 3 4 5 6 7 8 [9] 10 11 12 13 14 15 16
goodhart
04-01-2013, 10:55 AM
Nice work!
evotuner
04-01-2013, 01:39 PM
Nice work!

Compliments from GH? You must be doing something right haha

Btw great job man
Halon
04-01-2013, 06:54 PM
Kick ass man!
99gsxjoel
04-01-2013, 10:19 PM
Well it was short lived... there is a odd sound coming from the engin bay, and when I press in the clutch it goes away. This will be a fun one to try and hunt down.
JET
04-01-2013, 10:39 PM
Loose flywheel. What kind of noise is it?
CornFed2.4
04-01-2013, 11:37 PM
Turbotalon!?!?!?! Remember when you and Jim came up cause I thought it was blown up. Fixed the tune and could hear sloppiness in the trans and my throw out bearing was toast! Sounds like that.

I stopped over there for a minute and it sounds awesome running when pressure is applied to the pedal (alot of play in the pedal up top).

Our thoughts were in it got bled and adjusted it would hopefully make the noise stop. We will have to see. Worst case scenerio throw out bearing or flywheel bolts.

He used the arp flywheel bolts that Map sells. (Celica kit). I've heard that sometimes they don't go all the way in so maybe :news:

Another note is he said it worked fine until he got to Acapulco in Blaine 15 mins or so of driving then the noise started. So to me it sound like a bleed and adjustment away from being good to go. Crossing fingers.
evotuner
04-01-2013, 11:37 PM
pressure plate rattling some too?
CornFed2.4
04-01-2013, 11:37 PM
Loose flywheel. What kind of noise is it?

clunking clanky kind of business.

Sounds like broken rod but in the trans.
99gsxjoel
04-01-2013, 11:47 PM
Thanks for explaining it you said it a lot betting than I could. My thought is that there might be air in the line and it isn't disengaging the clutch all the way. There is a large dead spot at the top of the pedal.

Just watched this video on how to adjust the clutch so we will see.
http://www.youtube.com/watch?v=vYJxQyjIhUw
blackawdtsi
04-02-2013, 12:04 AM
Thanks for explaining it you said it a lot betting than I could. My thought is that there might be air in the line and it isn't disengaging the clutch all the way. There is a large dead spot at the top of the pedal.

Just watched this video on how to adjust the clutch so we will see.
http://www.youtube.com/watch?v=vYJxQyjIhUw

Did you gob the shit out of red loctite on the flywheel bolts?

That's what my bet is on.