need asap-MF660031 oil return crush washers

[mike55112]

I already ordered them for mitsu but won't be here till Saturday and I would really like to get some before then, they are the 2 washers for the bolts on the oil return line that bolts to the pan. I've tried different style of washers but it still leaks. Someone has to have some extras laying around. They are 2.50 for both at mitsu and I'm willing to pay 10 if I can get some by tomorrow

[x-pride]

Have you checked to see if kaths auto on rice street might have something in the size you are looking for?

[1G_DSM]

I have them laying around somewhere. I'll post here once I get home and hopefully I can dig them up. I also have brand new OEM bolts and OEM gasket.

[mike55112]

I have them laying around somewhere. I'll post here once I get home and hopefully I can dig them up. I also have brand new OEM bolts and OEM gasket.

Pm what you want for them if you find them.

[s1ngletracker]

these are just metric copper crush washers right? I'd think you could find such a thing locally or order from mcmaster, fastenal, auto parts stores, etc. I usually make a standard size washer work as well. Probably doesn't even need to be copper. Local parts store might have something on the shelf that should work.

Make sure mating surfaces are clean as well.

[1G_DSM]

I think this is what you want. MR258477 oil return line gasket, MF660031 turbo oil return line crush washer, and MF101229 bolt (return line to pan). These are all brand new and OEM. The gasket is sort of dirty but its new. $14 and its all yours. It's basically what I paid for them so I'm not making any money. I'm a honest guy and I don't want to rip anyone off. Shipping was $10 and was worth more than the parts lol.

http://i25.photobucket.com/albums/c78/1G_DSM_AWD/IMAG0246.jpg

[mike55112]

these are just metric copper crush washers right? I'd think you could find such a thing locally or order from mcmaster, fastenal, auto parts stores, etc. I usually make a standard size washer work as well. Probably doesn't even need to be copper. Local parts store might have something on the shelf that should work.

Make sure mating surfaces are clean as well.

Incorrect, these washers have a coating on one side. I've tried different washers in the past.

[mike55112]

I think this is what you want. MR258477 oil return line gasket, MF660031 turbo oil return line crush washer, and MF101229 bolt (return line to pan). These are all brand new and OEM. The gasket is sort of dirty but its new. $14 and its all yours. It's basically what I paid for them so I'm not making any money. I'm a honest guy and I don't want to rip anyone off. Shipping was $10 and was worth more than the parts lol.

http://i25.photobucket.com/albums/c78/1G_DSM_AWD/IMAG0246.jpg

Can you pm your contact info, I will get ahold of you tonight.