Brand new revised Forrester Intake Manifold's

[spoolin d dub]

delete

[jrohner]

Sparks my interest. Know of any reviews or dyno charts with these?

[spoolin d dub]

Sparks my interest. Know of any reviews or dyno charts with these?I've ran a regular Forrester and now have a modified one on my car. I had very minimal lowend loss but great mid/topend power. Personally I still think this is the best intake manifold for our cars.

here is my car at 30psi on my old 70mm turbo without a 2step and a bad launch.

http://www.youtube.com/watch?v=Y75glcCYj6w






Mike Reichen made over 1044awhp with one.

http://www.youtube.com/watch?v=O4RRelSyPwQ&feature=player_embedded

[turbotalon1g]

I've ran a regular Forrester and now have a modified one on my car. I had very minimal lowend loss but great mid/topend power. Personally I still think this is the best intake manifold for our cars.

here is my car at 30psi on my old 70mm turbo without a 2step and a bad launch.

http://www.youtube.com/watch?v=Y75glcCYj6w






Mike Reichen made over 1044awhp with one.

http://www.youtube.com/watch?v=O4RRelSyPwQ&feature=player_embedded


No solid dyno numbers/comparisons or flow bench numbers?

The price seems good

[spoolin d dub]

No solid dyno numbers/comparisons or flow bench numbers?

The price seems goodI have no back to back dyno numbers. The manifolds are not new to the market. If you search the net you will find info on them. They are well proven. My turbo was 70mm with a 71mm turbine and on the street I was getting positive boost by 3400rpm!!

my car at 31psi with 4 spyder diff ,no 2step on street tires. 10.5 at 135mph
http://www.youtube.com/watch?v=kWyaCItZA_c

2g dsm
http://www.mitsu-media.com/showthread.php?t=9233

a friends evo 2 with forrester intake manifold from 2007 (his car is why I got the manifold)
mpt70 700hp dynojet
street tires at track
http://www.youtube.com/watch?v=asq0fP4KoaU

same evo2 same forrester intake manifold 2011
bws400 74mm 746whp on buschurs mustang dyno
street tires at track.
http://www.youtube.com/watch?v=A0ZrrYleYn8&feature=share



for the price this is a steal!!!

[spoolin d dub]

98 GSX
Mods on the GSX:

6-bolt block with Eagle H beam rods
Ross Pistons
ARP hardware
Bored .30 over
Magnafluxed and Micropolished crank
New oil pan
New front case
New timing accessories
1g cylinder head
SI/Manley dual springs
Titanium retainers
SS valves
Mitsu 4-layer metal head gasket
ARP head studs
Comp full race cams
Forrester intake manifold
780cc Injectors
Cosmo 302lph fuel pump
6-AN Fuel lines
Aeromotive FPR
SBR Garrett FMIC with 2.5" Piping
Tial BOV
AGP Custom 50 trim turbo setup
Turbonetics Evolution wastegate
3" Exhaust
Southbend 2600lb clutch
ACT flywheel
AEM Engine Management System
Innovate motorsports wideband
Prothane Motor Mount Inserts

vs

Silverado w/76mm turbo 750whp

http://www.youtube.com/watch?v=AnKWMHb5ecU

The manifold WORKS!!

[spoolin d dub]

I've had request for more pics so here are a few. As you can see these are brand new!

http://i307.photobucket.com/albums/nn290/spoolinddub/IMAG0266.jpg
http://i307.photobucket.com/albums/nn290/spoolinddub/IMAG0265.jpg
http://i307.photobucket.com/albums/nn290/spoolinddub/IMAG0264.jpg
http://i307.photobucket.com/albums/nn290/spoolinddub/IMAG0262.jpg

[DSMPARTSGURU]

no injector bosses?

[Perkul8r]

no injector bosses?

The injectors go into the head, not the intake.

[spoolin d dub]

no injector bosses?No injectors lol. But they come setup with bungs to run nitrous for all the auto guys.