Log in

View Full Version : How many T's can you make in a vacum line?

Pages : 1 [2]
GsXtUrBo98
06-12-2011, 04:59 PM
Ok sorry, thanks aaron
95talonracer
06-12-2011, 06:34 PM
Am I wrong or isn't your boost controller supposed to be connected before the throttle body like off the fitting from the turbo if equipped?
OMFGeofffff
06-12-2011, 07:27 PM
It's ideal to have it tapped in as close to the turbo as possible.
GsXtUrBo98
06-12-2011, 09:00 PM
My turbo does not have a nipple off of it for the boost gauge
tpunx99GSX
06-12-2011, 10:55 PM
My turbo does not have a nipple off of it for the boost gauge

Ive seen it tapped and sealed into a UICP after the turbo. Just simply drilling a hole in your UICP, and putting a barbed nipple and some sealant/JB to keep things from leaking.
95talonracer
06-12-2011, 11:41 PM
Ive seen it tapped and sealed into a UICP after the turbo. Just simply drilling a hole in your UICP, and putting a barbed nipple and some sealant/JB to keep things from leaking.
x2
Pushit2.0
06-12-2011, 11:54 PM
Just make sure the BAP sensor is not on a vac line with an electronic boost controller, if you have a "standard" manual boost controller put it in line with what ever sees manifold pressure and you are good to go.

Its a dsm, put it in the crank case or water jacket and it might work just fine.

~John