Log in

View Full Version : WTF happened?

Pages : [1] 2 3 4
19TsiAwd90
02-17-2011, 01:33 PM
well i got my car back from primo the otherday with the trasfercase seal and yoke/ujoint replaced, and my new exhaust i love it only issue is while driving to work today i went to accel thur the intersection and nothing happend..

It was in gear, and clutch pedal all the way out but nothing happend. I looked at all the easy stuff, slave cyl, master cyl, they both work fine, shifter cables the move fine, it goes into gear but when you let out the clutch nothing happens it has a brand new clutch and there is no burning clutch smell at all.

I feel like its something inside of the tranny its self, but that would lead me to think i would atleast have one gear that works but none do, idk how thes trannys work on the inside so idk let me know what you think it is
thanks,
Ryan
asshanson
02-17-2011, 01:40 PM
So does the car rev like it's in neutral? Please explain "nothing happens".
19TsiAwd90
02-17-2011, 01:41 PM
yes it just free revs like its in neutral
19TsiAwd90
02-17-2011, 01:45 PM
yes i can start the car in gear i can shift into "gear" without pushing the clutch in
93gtpeater
02-17-2011, 01:53 PM
Can you shift it when its running with out pushing the clutch in? How does your pedal feel? You sure your fork is moving?
19TsiAwd90
02-17-2011, 01:54 PM
possible, i think i would have hurd this though there are no strange noises at all.. ill see if i cant take off that plat on the bottom of the tranny and look into the bellhousing to see if i can see anything
19TsiAwd90
02-17-2011, 01:56 PM
Can you shift it when its running with out pushing the clutch in?
yes i can
How does your pedal feel?like it always has
You sure your fork is moving?
100% positive
asshanson
02-17-2011, 01:58 PM
Maybe it pumped up and isn't allowing the clutch to engage. Try adjusting your pedal to grab lower, towards the firewall.
19TsiAwd90
02-17-2011, 01:59 PM
Maybe it pumped up and isn't allowing the clutch to engage. Try adjusting your pedal to grab lower, towards the firewall.
tried pumping it, but its as if there is no clutch i think the pressure plate bolts backed out the peadle it adjusted to grab as low as possible
asshanson
02-17-2011, 02:26 PM
tried pumping it, but its as if there is no clutch i think the pressure plate bolts backed out the peadle it adjusted to grab as low as possible

No, I meant sometimes after a clutch install the pedal grab point can creep up to the top, but if you've adjusted it as low as it can go then nevermind. Time to take off the transmission.