View Full Version : 50 rpms?
Brandito93
02-15-2011, 04:45 PM
Jungy we checked and only running on 2 cylinders. Brought it to presicion and they said it was the computer...doubtful. Got a new coil something, I forgot what it really was. But got a new one of those and that didn't fix it. Any other suggestions on what might it could be?
Jungy
02-15-2011, 05:10 PM
You replaced the coil and still no go? How about the power transistor?
Halon
02-15-2011, 05:11 PM
I'd verify what's causing those two cylinders to not be running. Fuel or spark (most likely spark). The follow that back until you find the problem. If it's spark, start checking plugs, wires, coil, ignitor... If no fuel, start checking injectors, injector plugs/wiring, resistor pack...
niterydr
02-16-2011, 12:02 AM
Which two cylinders aren't working? The DSM runs a wasted spark system, if they share a coil, your problem is ignition. If they don't share a coil, something else may be wrong mechanically.
I am leaning towards a coil/transistor/wiring concern.
Brandito93
02-16-2011, 04:51 PM
Ok this should probably go in the WTBorrow section ha but I already have a thread setup for this, but anyone in/around the Alexandria area have an Ignition Control Module that I could borrow asap to see if thats the part I need, that would be EXTREMELY helpful.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.