View Full Version : hx 35
derrecks92talontsi
01-27-2011, 03:37 PM
I have a 1g with 272 cams and a evo3 16g with afc what inj size would i need to run hx35 on e85 and do they still make a hot side to bolt on a dsm. And if the afc would work for now to i get a link. I want something to make 400 awhp or 450 awhp.
19TsiAwd90
01-27-2011, 03:53 PM
I have a 1g with 272 cams and a evo3 16g with afc what inj size would i need to run hx35 on e85 and do they still make a hot side to bolt on a dsm. And if the afc would work for now to i get a link. I want something to make 400 awhp or 450 awhp.
well you gonna need some decent injectors 1200cc+ i have been thinking about going this route myself, the housing your thinking of is a bep bolton housing and yess it bolts right up and there are multiple options for internal wg or external, as well as a .55ar or .70ar as for the afc working its not gonna work on injector that large, yor gonna have to run link or get a eprom chip tuned by shane..
derrecks92talontsi
01-27-2011, 04:07 PM
I have a maft wouldnt that work for the inj. Or would 650 work for 92 pump gas.
19TsiAwd90
01-27-2011, 04:10 PM
^^650's are much too small for pump gas even, i would say 780's atleast, i think you under estimate the power of the hx35.. and no, the maft is to crude of a tuning tool
derrecks92talontsi
01-27-2011, 04:33 PM
what power would i get out a hx35 400awhp or more.
19TsiAwd90
01-27-2011, 04:36 PM
more depending on your setup
heres a good page i found
http://integralmotorsports.com/holset-turbo-tech/
viridionplague
01-27-2011, 06:35 PM
if i remember right, the hx35 is good for 550-600 hp.
GsXtUrBo98
01-27-2011, 06:47 PM
If I was you I wouldn't cheap out on injectors.. I bought 1350's for my scm61 and now that I'm gonna run my bb billet 35r I wish I went with some 1650's..
goodhart
01-27-2011, 06:51 PM
Holy shit punctuation ownz this thread. Can hardly read this shit.
If you want to make decent/big power with an HX35 I would go with a T3 exhaust housing, otherwise they seem to make E316G type power with the mitsu bolt on housings. I would get something more than a SAFC to tune it with though if you're going for 400-450HP, this isn't 1998 ;)
derrecks92talontsi
01-28-2011, 09:19 AM
i want to put a link in the car but the founds r not there right now and i just need to get the car running so i was thinking that the afc would work for know just not so i blow it up that is what i care.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.