scheides
01-22-2011, 12:03 PM
...for me, the idea of owning one, that is! CBRD Speed Factory has joined a few other shops in building a nice FMIC, intake, and exhaust for the Ralliart. This is nice as they make top-quality parts, but wait till you see what else they have in store :D
First off, maxing out the stock turbo. Chad has shown 249whp/279wtq with their parts on pump gas, which is pretty respectable and testement to some of the parts he's chosen. They're making a ralliart-specific FMIC because apparently the bumper cover is a tish smaller than the standard evoX. Sounds like they're using the garret 3.8" core that I've grown to love from the evo8/9.
Stock turbo stuff:
http://forums.evolutionm.net/9001430-post51.html
CBRD EVO X Fmic
CBRD RA specific 3" Short ram Bell mouth intake
CBRD Custom Catback exhaust with 3" piping, Vband, and Quad Tips, resonator and muffler
CBRD Resonated Test pipe
Razorlab basemap, retuned by CBRD, with SST tweaks by Razorlab and Jon Drenas,.
STOCK IC pipes, Stock Inlet tube, Stock boost solenoid and pill, Stock manifold, turbo, downpipe, etc...
The highest uncorrected (non smoothed) numbers were 249whp/279 wtq at 19.5 psi...
http://img.photobucket.com/albums/v204/cbrd/RASBexhaustintake.jpg
Now here's where things get interesting!
http://forums.evolutionm.net/9005741-post79.html
They will be offering upgrades to the stock single-scroll TD04HL-15g turbo in two flavors: upgraded compressor wheel and upgraded both compressor & turbine wheels. The latter will have a target of 320whp/350wtq on their Mustang dyno, which is a nearly perfect power level for pump gas imho. I'm sure with some e85 it could see 400wtq and 350whp but I think the original target is a nice spot for the factory SST transmission.
http://img.photobucket.com/albums/v204/cbrd/DSC_0448.jpg
(idk if this is the stock or upgraded turbine wheel, I know they were working out supply issues with them)
http://img.photobucket.com/albums/v204/cbrd/DSC_0451.jpg
Why is this awesome? Well, if you own a ralliart, you CAN swap in an evoX turbo (and thus the BBX/BBX Lite/FP Green/Red/Black), but you also need the manifold (its twin-scroll vs single-scroll on the ralliart), intake (inlet on the x is a 3-bolt 45° neck, rallliart is more standard straight inlet), oil/coolant lines, and a mini-battery kit. With this option, you send in a stock turbo, they upgrade it and send it back (remember this is NOT FP! CBRD's turnaround time in my experience is insanely fast, like 48 hours in their facility+shipping time).
Anyways, I have been eyeing this car as something to potentially get for Anna in the next year or so, and this makes me very excited! :D
First off, maxing out the stock turbo. Chad has shown 249whp/279wtq with their parts on pump gas, which is pretty respectable and testement to some of the parts he's chosen. They're making a ralliart-specific FMIC because apparently the bumper cover is a tish smaller than the standard evoX. Sounds like they're using the garret 3.8" core that I've grown to love from the evo8/9.
Stock turbo stuff:
http://forums.evolutionm.net/9001430-post51.html
CBRD EVO X Fmic
CBRD RA specific 3" Short ram Bell mouth intake
CBRD Custom Catback exhaust with 3" piping, Vband, and Quad Tips, resonator and muffler
CBRD Resonated Test pipe
Razorlab basemap, retuned by CBRD, with SST tweaks by Razorlab and Jon Drenas,.
STOCK IC pipes, Stock Inlet tube, Stock boost solenoid and pill, Stock manifold, turbo, downpipe, etc...
The highest uncorrected (non smoothed) numbers were 249whp/279 wtq at 19.5 psi...
http://img.photobucket.com/albums/v204/cbrd/RASBexhaustintake.jpg
Now here's where things get interesting!
http://forums.evolutionm.net/9005741-post79.html
They will be offering upgrades to the stock single-scroll TD04HL-15g turbo in two flavors: upgraded compressor wheel and upgraded both compressor & turbine wheels. The latter will have a target of 320whp/350wtq on their Mustang dyno, which is a nearly perfect power level for pump gas imho. I'm sure with some e85 it could see 400wtq and 350whp but I think the original target is a nice spot for the factory SST transmission.
http://img.photobucket.com/albums/v204/cbrd/DSC_0448.jpg
(idk if this is the stock or upgraded turbine wheel, I know they were working out supply issues with them)
http://img.photobucket.com/albums/v204/cbrd/DSC_0451.jpg
Why is this awesome? Well, if you own a ralliart, you CAN swap in an evoX turbo (and thus the BBX/BBX Lite/FP Green/Red/Black), but you also need the manifold (its twin-scroll vs single-scroll on the ralliart), intake (inlet on the x is a 3-bolt 45° neck, rallliart is more standard straight inlet), oil/coolant lines, and a mini-battery kit. With this option, you send in a stock turbo, they upgrade it and send it back (remember this is NOT FP! CBRD's turnaround time in my experience is insanely fast, like 48 hours in their facility+shipping time).
Anyways, I have been eyeing this car as something to potentially get for Anna in the next year or so, and this makes me very excited! :D