FS: Big 16g, 2g FMIC kit, 560 injectors, 2g head, 2g stuff

[C3L1CA]

2g head - $50
Has cam caps and you can have the stock cams if you want. It is not assembled but I do have all the parts which you can have as well. Might have a bent valve or two. Not too sure. Sold as is

6bolt short block - $75
Had some sort of ticking said the guy I picked it from. He thought it was from a blown balance shaft bearing. I planned on building it but just don't have the time or money I once had. Sold as is

6 bolt head - $75
stock 6 bolt head minus cams

Tein Flex Coilovers - $900 obo
Retail on these are $1,470 from map without sales tax and shipping. Rears were just rebuilt two summers ago and barely have any miles.
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0772.jpg

2g o2 housing - $10

2g fuel rails - $5 (I have 2)
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0601.jpg

Bare 7 bolt block - $5

2g rods/pistions - $20
Rods did spin a bearing but I would think most people would just want the pistions.
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0589.jpg

2g intake manifold - $5

2g Intercooler kit - $200 with turbo xs bov. This thing is pretty big, it's 3" think and can get other measurements if anybody would like them. Comes with mounting bracket and bolts to mount it. Fills up a 2gb bumper perfectly. There are no markings I saw on the core, but the guy I bought the car from said it was $500 just for the core.
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0604.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0605.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0608.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_06251.jpg
It's pretty big, this is compared to my SBR/Kinetic front mount
http://i6.photobucket.com/albums/y202/C3L1CA/0d75b0a1.jpg

Nardi Steering Wheel, NRG quick release setup - $275
http://i6.photobucket.com/albums/y202/C3L1CA/fac904ee.jpg

2g stock intake - $10
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0609.jpg

2g steering wheel airbag: $10 obo
http://i6.photobucket.com/albums/y202/C3L1CA/c0228ee2.jpg

2g shifter cables - $30

Stainless steel clutch line with slave - $20

2g SMIC shroud: Free
http://i6.photobucket.com/albums/y202/C3L1CA/ca1c5fab.jpg

90 degree 4ply coupler: $15 obo
Does have a slight burn to it from my dump, but it does not go all the way through. I had black duct tap over it and you couldn't even tell:lol:
http://i6.photobucket.com/albums/y202/C3L1CA/9694ee14.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/e385dc98.jpg

Random LED Light: $5 obo
http://i6.photobucket.com/albums/y202/C3L1CA/cfef19b7.jpg

2ga wing (just center section): $5
http://i6.photobucket.com/albums/y202/C3L1CA/e0f48fa1.jpg

1g power steering pump: $5
http://i6.photobucket.com/albums/y202/C3L1CA/1a4eb247.jpg

Stock 2g upic: $5
http://i6.photobucket.com/albums/y202/C3L1CA/f3eeafb6.jpg

Shift knob off my old celica - $5
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0650.jpg

GForce harnesses - $75
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0649.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0648.jpg

Knock off HKS bov - $20
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0643.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0644.jpg

Redline Heavy Shockproof - $6 brand new just dirty
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0647.jpg

2g rear leather seats: $50
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0732.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0733.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0734.jpg
The rear folding seats no longer have the bracket to bolt them down.

2g rear tails: $75 obo
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0738.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/71e14f87.jpg
Middle piece is black and looks really nice on any black dsm.

2g fuel pump:$50
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0740.jpg
Comes as pictured except no fuel pump.

2g driver and passenger mirrors: $50 a piece
Black in color and in good condition.

2g non cruise control throttle cable - $30

2g shifter base assembly - $25

2ga side skirt end caps - $15 per side. Still have both.

2g front gray leather seats. Driver side is a little beat up but passenger side is near perfect.
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0767.jpg
http://i6.photobucket.com/albums/y202/C3L1CA/IMG_0770.jpg

Tial bov flange: SOLD
560cc Injectors - SOLD
Apexi N1 Down pipe for 2g awd - SOLD
Random Battery stuff: SOLD
2g fuel line - from fuel filter to rail: SOLD
2g wheels - SOLD
2g head with stock cams - SOLD
Big 16g - SOLD
BNIB stock looking pistions that came with my car - SOLD
AEM Wideband Sensor - SOLD
2g Eprom Ecu - SOLD
1g fucked up motor mount: threw away
2g MAF - SOLD
ARP Headstuds - Sold
2g exhaust manifold - SOLD
2g water pipe - SOLD
2g Oil Dip Stick - SOLD
Aeromotive Adjustable FPR - SOLD

Feel free to throw out offers. The worst I can do is say no.

PM or call/text at six five one. three four three. one zero five two

[C3L1CA]

bump for pictures

[Troy Rossberg]

Is the 7 bolt block rebuilt and machined?

[C3L1CA]

Is the 7 bolt block rebuilt and machined?

It is just a bare block. The cylinder walls look great and you can have the oil pump setup. I think it was recently rebuilt by the previous owner and then it spun a rod bearing. It is cheaper for me to just put a six bolt in it than rebuild it. Also map was looking to buy cranks but if you would like that I'd throw it in cheap.

Let me know if you want some detailed pictures or I'd you would like to come check it out!

[aaronspeed]

If you will ship I will take the injectors and pistons. My shipping zip is 43334.

[C3L1CA]

If you will ship I will take the injectors and pistons. My shipping zip is 43334.

I am willing to ship. PM sent.

[mitsukid124]

is the big 16g an mhi turbo? and is there any shaft play?

[C3L1CA]

Yes it is an mhi turbo and not there isn't any shaft play.

If you'd like to check it out just let me know!

[C3L1CA]

Tial bov flange sold

[C3L1CA]

List updated.

Happy turkey day people!