auto to manual

[twack]

you will need the manual ecu for the 450 injectors which i pray you installed as well, but the big thing you ned to do is swap out the pedal assembly for the manual one with a clutch

[Febo]

Yeah, that pedal swap was a mutha... thats for sure.

I just assumed that went without saying haha

[Powers]

ok so i found at a junk yard multiple 2g n/a manuals i was wondering if they are the same setup that i could swap into my 2g minus tranny but pedals, cables, brackets are they all the same?

[Febo]

the pedal assy's should be the same, along with the master cylinder, shifter, and interior brackets, but I would assume that the cables will not be the same as the transmission is on the other side of the car is it not?

[goodhart]

the cables will not be the same as the transmission is on the other side of the car is it not?


Correct. 420a's have the trans on the drivers side.

You can use the same bushings, but cables I would assume would not work.

[Powers]

ok thanks guys i just priced everything with the yard and im getting the shifter, pedals, center console, and clutch master for 85 bucks