Pushit2.0
10-05-2010, 01:20 AM
-Fully built tranny: 91 dsm based, 22 spline output shaft
This is equal or better then a Shep stage 4 tranny. I bought all the parts new from Jacks Trans: Welded center diff, Evo3 first gear and input shaft, new stock 2nd gear with cut engagement and double synchro for the best possible shifts, new 1/2 hub and slider and double synchro dog springs, full evo 3 3rd/4th gear upgrade with double synchros, new hub and slider, new shift rail and shift forks with double pin on the 3/4, used 5th gear parts, new bearings and properly shimmend tranny, I welded all the things that could break on the front diff, the cross pin, ring gear bolts. This shifts at 9500rpm with a twin disk with little to no effort. I have never had it grind or do anything weird. I am selling to help fund the new motor build, then I will save up to build this same tranny again, or a dog box.
The price is for local pick up, or I will deliver up to 100miles of the Twin cities $1600 cash OBO. I will ship, but shipping is extra.
-Aeromotive A1000 fuel pump: :::: SOLD ::::
-FAST 160lb/hr 5ohm fuel injectors(1680cc) I had a full set of 8. 4 of the injectors have 300 miles on them, and 4 have no miles. Priced for pick up, or shipping is extra: $50 each Or $160 for a set of 4 ::: 4 SOLD ::: 4 left!
-AEM EMS VS 1: This is box #105 This has some internal damage, but AEM will be able to fix it. $600 as is with sensors, if I send it in to be fixed I will want $900 w/o sensors.
-BF Goodrich comp T/A drag radials, the new tread style. 225 50 15s, 9.3" section width on a 7" rim. These tires have a lot of grip on the street, and handle 650awhp with a 2400lb car. At the drag strip with track prep I would have been able to get a 1.6 60', and with little to no track prep I was able to cut a 1.73. I ran a best of 10.06@148mph with a 1.8 60'.
These have 100 miles on them and look new $500 OBO for the set of 4.
-Kirkey 41700 - Kirkey Aluminum Pro Street Drag Racing Seat with black seat cover, brand new: $200 OBO
PM for details, I will post some pics when I get a chance.
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22032.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22020.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22024.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22012.jpg
http://www.mitsustyle.com/photopost/data/612/medium/P271010012.JPG
http://www.mitsustyle.com/photopost/data/612/medium/Picture_21011.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_8053.jpg
~John
This is equal or better then a Shep stage 4 tranny. I bought all the parts new from Jacks Trans: Welded center diff, Evo3 first gear and input shaft, new stock 2nd gear with cut engagement and double synchro for the best possible shifts, new 1/2 hub and slider and double synchro dog springs, full evo 3 3rd/4th gear upgrade with double synchros, new hub and slider, new shift rail and shift forks with double pin on the 3/4, used 5th gear parts, new bearings and properly shimmend tranny, I welded all the things that could break on the front diff, the cross pin, ring gear bolts. This shifts at 9500rpm with a twin disk with little to no effort. I have never had it grind or do anything weird. I am selling to help fund the new motor build, then I will save up to build this same tranny again, or a dog box.
The price is for local pick up, or I will deliver up to 100miles of the Twin cities $1600 cash OBO. I will ship, but shipping is extra.
-Aeromotive A1000 fuel pump: :::: SOLD ::::
-FAST 160lb/hr 5ohm fuel injectors(1680cc) I had a full set of 8. 4 of the injectors have 300 miles on them, and 4 have no miles. Priced for pick up, or shipping is extra: $50 each Or $160 for a set of 4 ::: 4 SOLD ::: 4 left!
-AEM EMS VS 1: This is box #105 This has some internal damage, but AEM will be able to fix it. $600 as is with sensors, if I send it in to be fixed I will want $900 w/o sensors.
-BF Goodrich comp T/A drag radials, the new tread style. 225 50 15s, 9.3" section width on a 7" rim. These tires have a lot of grip on the street, and handle 650awhp with a 2400lb car. At the drag strip with track prep I would have been able to get a 1.6 60', and with little to no track prep I was able to cut a 1.73. I ran a best of 10.06@148mph with a 1.8 60'.
These have 100 miles on them and look new $500 OBO for the set of 4.
-Kirkey 41700 - Kirkey Aluminum Pro Street Drag Racing Seat with black seat cover, brand new: $200 OBO
PM for details, I will post some pics when I get a chance.
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22032.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22020.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22024.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_22012.jpg
http://www.mitsustyle.com/photopost/data/612/medium/P271010012.JPG
http://www.mitsustyle.com/photopost/data/612/medium/Picture_21011.jpg
http://www.mitsustyle.com/photopost/data/612/medium/Picture_8053.jpg
~John