Fuel System?

[asshanson]

Instead of the banjo bolt, use a 12x1.25 to -6 AN adapter. The 12mm threads into the top of the fuel filter, the -6 on the other side will go to the feed line to the rail. Then you just need the -6 to fuel rail adapter. BTW, I just found one in my box of parts after moving (the -6 line and rail adapter), if you want it. It's off my old talon, you would just need to buy the 12mm to -6 adapter from somewhere like summit.

http://www.summitracing.com/parts/EAR-991945ERL?autofilter=1&part=EAR-991945ERL&N=700%20115&autoview=sku

[Halon]

There's actually a nice tech article over on Tuners explaining it with pics if you aren't too sure about it all. Tells you all the fittings you'll need and what-not. I'll try to find it and link it here.

[Halon]

http://www.dsmtuners.com/forums/articles-engine-fuel/216886-installing-aftermarket-fuel-filter-fuel-feed.html

There ya go. You can see in one of the notes which fitting works for the stock filter to adapt it to fit a new feedline. And he thanks user me612 for the tip, guess who that might be :)