95 Talon TSi AWD

[DSMINMN]

Just a little update. I picked up some parts for the Talon a few Weeks ago.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-3130-1345510661510.jpg

Anyone should be able to see one of the parts. Lol Here's the other one.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-1611-1345510684842.jpg

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-30360-1345510728065.jpg

Lastnight I filled the hole with cardboard and put two more layers of fiberglass on. According to my dad however, the resin didn't harden. My dad messed with it and here is the result.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-40070-1345511723829.jpg

When I get a chance I am going to file it down and drill out the holes for gauges and buttons.

[DSMINMN]

I haven't really worked on the car since my last post. I've worked on some of the dash/interior parts however. One part would be the center vent gauge holder/cluster. I cut out the holes for the buttons I plan to use.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-44589-1353901252182.jpg

I also just found a close size hole saw (51mm) to fit my 52mm gauges. It will at least get me on the right path of getting the gauges put where they belong.

I'm not sure if I am going to keep the stagger/angle I have between each of the gauges; like I have draw here.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-30043-1353902108121.jpg

Here's a picture from September of the dash and how it should be setup when I am done. Minus the gauges obviously.

http://i467.photobucket.com/albums/rr38/imports4life/431328_4680564339161_1702353696_n.jpg


On another note, I have started cleaning up my old laptop to start refreshing it for its future job as a tuning laptop. I know next to nothing about computers or operating systems so I will probably have to look around on what I want to do with this. Especially as far as upgrading it goes. None the less, here she is in her unfound glory.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-34827-1353902030771.jpg

Since winter is starting, and the Colt is DAMN NEAR done (thank God), I am going to start from the ground up with this thing. Suspension and possibly braking is on my list of things to do. Stay tuned for that. Thanks for looking!

[DSMINMN]

Here are a few items a friend and I picked up yesterday. These don't even begin to scratch the surface on how much stuff we got for a great deal. We had to drive a few hours but it was well worth it.

http://i467.photobucket.com/albums/rr38/imports4life/photobucket-67457-1359984058150_zpsa85a0036.jpg

Depending on what I keep, I should have a spare 7 bolt short block and something to get a 6 bolt swap possibly started.

[DSMINMN]

Well, I guess it is about time to blow some of the dust off of this again..

Engine and trans. pull? Sounds a lot more simple than pulling the auto. alone to me.

[DSMINMN]

So a friend and I hauled this thing up here to Bemidji a few weeks ago. Kind of a pain to load and unload off of the trailer with wood planks to help it not rub. Then the planks got wet as we unloaded; INTERESTING (sliding and shit).

http://i467.photobucket.com/albums/rr38/imports4life/1546254_10203128515160829_92407401_n_zpsf33a8d63.j pg (http://s467.photobucket.com/user/imports4life/media/1546254_10203128515160829_92407401_n_zpsf33a8d63.j pg.html)

http://i467.photobucket.com/albums/rr38/imports4life/1546387_10203137221418480_1486797042_n_zps0e7474c5 .jpg (http://s467.photobucket.com/user/imports4life/media/1546387_10203137221418480_1486797042_n_zps0e7474c5 .jpg.html)

As the weather started getting colder and classes started up I just put off pulling the transmission.. Now this here...I'm not even sure how to explain. The owner of the apartment had an older gentleman come pickup and fix his snow blower (you can see in the second picture).

The day after he dropped it back off I came out to see this.

http://i467.photobucket.com/albums/rr38/imports4life/59952_10203216052229201_1027366819_n_zps6875e3b6.j pg (http://s467.photobucket.com/user/imports4life/media/59952_10203216052229201_1027366819_n_zps6875e3b6.j pg.html)

http://i467.photobucket.com/albums/rr38/imports4life/1497431_10203216051189175_772207002_n_zps45f6b17e. jpg (http://s467.photobucket.com/user/imports4life/media/1497431_10203216051189175_772207002_n_zps45f6b17e. jpg.html)

That would be a nice size dent and chip down to what I think may just be metal. I don't honestly remember but I do have part of the paint chip in my truck. You could say I wasn't and still am not too happy about it. My assumption is that the older guy that came to work on the snow blower and tried fixing it by flipping it on it's side in between my truck and the car. Obviously hitting the damn thing and saying nothing.

The owner of the apartment said he will take care of it so I'm not going to complain. What a pain in the ass though. After all the work to paint this thing. Stupid..

I guess this time it's getting wrapped in some damn bubble wrap!

Hopefully next time I can post on a positive note instead of bitching!

[mark4g63t]

Get it before it starts to rust.

[DSMINMN]

Get it before it starts to rust.

I am indeed going to have to do something pretty quick here.

[DSMINMN]

I am somewhat sad to be posting in this thread but happy as well. I am sad for the fact I had this car running for a few weeks (driving too I might add), then suddenly it decided to break itself. In nothing but true DSM fashion of course. I am happy as of the direction this car will FINALLY be taking!

http://i467.photobucket.com/albums/rr38/imports4life/temporary_zps44e85ad8.jpg (http://s467.photobucket.com/user/imports4life/media/temporary_zps44e85ad8.jpg.html)


Now to answer all of the questions; yes the front bumper came off. It was to attempt to fit the MAP FMIC kit I picked up for cheap. I just left it that way because I had a feeling something stupid was going to happen and I'd likely need it off anyhow. Guess who was right?


Sometime this week I took the car out to go grab some McDonald's. I pulled up to a stop light with intentions to turn right and did so. As I completely the turn the transmission seemed to nearly downshift then maybe slip. It revved to probably 8k then jump back down. I instantly got over to the other side of the road and costed into Holiday.


http://i467.photobucket.com/albums/rr38/imports4life/temporary_zpsed48f7e5.jpg (http://s467.photobucket.com/user/imports4life/media/temporary_zpsed48f7e5.jpg.html)


http://i467.photobucket.com/albums/rr38/imports4life/temporary_zps2c410153.jpg (http://s467.photobucket.com/user/imports4life/media/temporary_zps2c410153.jpg.html)


I called a bunch of people and finally found a friend to help. I attempted to drive it as this grinding sound persisted from the transmission. I was about 5 blocks from Northwest Tech. so I wasn't worried. After about 4 blocks of going 20MPH (the max speed it would go), I gave up and we pulled it with a mini-ass strap.

[DSMINMN]

I don't have any picture of the car now because it just kind of pisses me off to see it. Sometime in the next few weeks/months I am going to remove the engine and trans. I have plans to finally build my 2.3 stroker I've wanted to forever and a day.


http://i467.photobucket.com/albums/rr38/imports4life/evo_zps56646167.jpg (http://s467.photobucket.com/user/imports4life/media/evo_zps56646167.jpg.html)


That would be my Evo.III block I am having a buddy bore & hone .020" over, line hone and resurface. I have ARP main studs ready as well as head studs. When my summer job starts up the saving begins. Hopefully by PG2 I can have this make an appearance as a WIP but still running.

I'm thinking Wiseco HD's @ 9.0:1 and Manley Tuff I-Beams. Maybe Crower rods; I haven't decided. I've got the 2.4 crank already though so I'm set there. Bearings are probably going to be ACL or Kings; can't decide.

Tuning and fuel will be 'Link V3, probably a DW 300 or Wally' 400, -8 line, FIC 2150s so I never have to worry about injector size.

Turbo will be the HX35W on either a MAP T3 or in a Bullseye housing; not sure.

I'll start the head work...as soon as I can find a damn 2g head for less than my left nut or I don't have to drive 4 hours for to end up with nothing.

http://i467.photobucket.com/albums/rr38/imports4life/derp_zps04f1296f.jpg (http://s467.photobucket.com/user/imports4life/media/derp_zps04f1296f.jpg.html)

http://i467.photobucket.com/albums/rr38/imports4life/derp2_zpsefa29469.jpg (http://s467.photobucket.com/user/imports4life/media/derp2_zpsefa29469.jpg.html)

Any way, just your run-of-the-mill bronze thingamajigs, swirl polished doohickeys & metal bottle shaped things. Nothing fancy.


I will update as I make the little progress I can for the moment. Thanks for looking!

[evotuner]

2.3's ftw!