Safc-2 Wiring

[john]

Does an SAFC2 snap in the same harness as a SAFC1? Do they have the same wiring harness just a different display and controls? I tried hooking one up last night to see if they snap in. The wire colors are the same but it didn't seem to work (no power at all). Is it possible that the wires correspond to different signal imputs?

[Shane@DBPerformance]

Well, the SAFC2 has one extra wire for knock. I don't know if they followed the same wiring order in the connectors. The wire colors are the same as to their functions between the 2 gens.

[john]

Hmmm, after a quick glance I thought all the wires were in the same order (color wise) and I thought there were 10 wires each. If someone has an SAFC2, can you post the wire colors in order? Thanks, John.

[Khadgar]

Not sure if this helps but Apexis site has the wiring diagrams in .pdf format.

[john]

I checked there site and it wouldn't open up. There are several errors in file. I could not view it at home, work, or at remy's house. Someone has to have an SAFC2 manual or something. Just the wire colors in order would help. I will search further on the internet.

[Shane@DBPerformance]

Just look at the plugs...

[Khadgar]

http://www.prostreetonline.com/pso/pages/h...sp?articleid=25 (http://www.prostreetonline.com/pso/pages/howto/showarticle.asp?articleid=25)


That might help, I dunno.