Garage projects: R.E.E.F. smim, Roll bar/ Roll cage work

[Pushit2.0]

I have a standard 2 car garage with a few to many things going on all the time. As you may have seen in my build thread the 2 car garage is a little full. I have a Airco 250 Tig welder, plasma cutter, Pro tools modified tube bender, press, air compressor full tool box and general metal fabrication hand tools. This is where most of the Galant build has taken place.

The R.E.E.F. SMIM for a 6 bolt head:
http://www.mitsustyle.com/photopost/data/616/medium/P1010058.JPG
http://www.mitsustyle.com/photopost/data/616/medium/P1010057.JPG

Here are the runner halfs, they are welding inside and out. Here is the die set up in my 12ton home made press. The manifold design was on my car last time it ran and I welded up a few for the flow bench test, which they did hold there own. The street version flows 449cfm per runner.

http://www.mitsustyle.com/photopost/data/616/medium/Picture_9042.jpg

Here is the start to the radius entry into the runners. After it is welded all around the inside there is about 2 hours of porting to smooth it all out. All said and done it looks like it takes 20+ hours to complete 1 manifold.

http://www.mitsustyle.com/photopost/data/616/medium/Picture_003.jpg
http://www.mitsustyle.com/photopost/data/616/medium/Picture_002.jpg

On the far right is the first smim I fabricated for the flow bench test. This manifold flowed 445cfm in #2, 3, 4, but #1 flowed 440cfm. The plenum is a little small but would work great on a car with a turbo smaller then a SC61.
Also here are the 2 versions, the "street" version and the "race" version.

http://www.mitsustyle.com/photopost/data/613/medium/Picture_032.jpg
http://www.mitsustyle.com/photopost/data/613/medium/Picture_030.jpg
http://www.mitsustyle.com/photopost/data/613/medium/Picture_029.jpg
http://www.mitsustyle.com/photopost/data/613/medium/Picture_031.jpg


Here is an 8 point 1 5/8" chome moly roll cage in an Mr2.

http://www.mitsustyle.com/photopost/data/614/medium/P1010118.JPG
http://www.mitsustyle.com/photopost/data/614/medium/P1010112.JPG
http://www.mitsustyle.com/photopost/data/614/medium/P1010093.JPG
http://www.mitsustyle.com/photopost/data/614/medium/P1010122.JPG
http://www.mitsustyle.com/photopost/data/614/medium/P1010098.JPG

Here is a 6 point chrome moly 1 3/4" roll bar with removable door bars.

http://www.mitsustyle.com/photopost/data/615/medium/Picture_8067.jpg
http://www.mitsustyle.com/photopost/data/615/medium/Picture_025.jpg

Here is the modified pipe bender and a snap shop of the work space. Just letting you guys know I am still alive, I plan to make it out to a lot more gatherings from now on.

~John

[turbotalon1g]

:woohoo1:

Keep up the good work. Sorry I couldn't get you solid numbers on that intake, i might have someone that can if no one steps up soon.

[goodhart]

looks like the SupraSport MR2...


Sorry I still haven't been able to dyno my car with your REEF mani on it yet, I have been short on funds the last couple months now since buying my built tranny

[awd-drifter]

wow John, you do some amazing work man. just amazing.

[Constant_Project21]

Looks like you do some great work there john!! I'll know who to pm when/if cage time ever comes!!

[4g63tcrazy]

What's the price on the REEF SMIM? PM me if you'd like.

[scheides]

Let's keep pricing and stuff out of this thread please; this is the project forum and these are damn nice projects! John is an awesome fabricator and it is obviously a labor of love. Just PM him, I'm sure he'd build ya one if you asked nice :)

[funky_monkey58]

Let's keep pricing and stuff out of this thread please; this is the project forum and these are damn nice projects! John is an awesome fabricator and it is obviously a labor of love. Just PM him, I'm sure he'd build ya one if you asked nice :)

To be honest, I was less than impressed with the roll cage in Gregs MR2.

Swing outs fit like shit, welds not uniform etc. The cage definitely will not pass any type of NHRA certification. (a 6 point needs no cert to run a 9.9)

[Matt D.]

To be honest, I was less than impressed with the roll cage in Gregs MR2.

Swing outs fit like shit, welds not uniform etc. The cage definitely will not pass any type of NHRA certification. (a 6 point needs no cert to run a 9.9)
http://www.ayo4theo.com/stuff/pics/haters-gonna-hate.gif

[funky_monkey58]

http://www.ayo4theo.com/stuff/pics/haters-gonna-hate.gif

This is what I expect.
http://i237.photobucket.com/albums/ff88/truaxmotorsports/cage002.jpg

Next time I am out in the shop in stillwater I will take some pics.