dsmlink tuning

[viridionplague]

just thought i would post this up, the guys on the link forums arent being very helpful.

this is dsmlink v2 using the v3 software.

if anyone has anything they wanna add in.

20 psi, on pump gas with some e-85 in there.

the point of tuning is to get a decent base tune before switching to e-85.

http://www.dsmlink.com/forums/attachment.php?attachmentid=31520&d=1274322210

[95talonracer]

If you have v2 then use v2. If you want to use v3 then pay to get the upgrade to use it.

[carltalon]

Do you have a link to a log on the DSMlink forums?

[viridionplague]

http://www.dsmlink.com/forums/showthread.php?p=414848#post414848

i dont know why the attachment never uploaded, but this is my thread on the link forums

[viridionplague]

If you have v2 then use v2. If you want to use v3 then pay to get the upgrade to use it.


the v2 software is alright, but the v3 software is easier to use, and has features v2 does not.

its actually recommended by ecmtuning to use the v3 software even if you have a v2 chip

[95talonracer]

Ahh so I take it you are just not using the gm trans feature are you? I don't think you can unless you get the wiring.

[95talonracer]

And I would either do only pump or only E85 so you know it's the same or as close to instead of mixing.

[viridionplague]

you have to have the v3 chip to have the direct maf cable.

i switched back to gas to figure out some issues i was having right after i switched to e-85 the first time. but some of the e-85 was still in so its not 100% pump gas.

this is just to get a good base tune before going full e-85

[turbotalon1g]

I'm confused are we looking at your car or mike's?

I'm not on my laptop so i can't see the logs, maybe swing by this weekend when u are out and about tuning or just whenever u are tuning and I can use my brain.

[viridionplague]

haha, i own mikes car. i bought it from him about a year ago now. i havent been able to get the name changed on the link forums yet.