Machine Shop, O Ring head

[9guy9]

Anyone have experience with a machine shop in the area that has cut their head for O ringing? I called a couple places in Mankato and got a long pause followed by a "we don't do that here".

[goodhart]

My brother knows a few different people that have done his 12-valve cummins heads, I'll post em up for ya when I get ahold of him.

[9guy9]

thank you

[turbotalon1g]

I called Gosh and he said he hasn't had to do it for anyone around here so I don't need it and then followed by saying he doesn't have the tooling for it, but he could do it but be ready to pay for the extra time.

That was a few months ago.

[munchgsx]

I called Gosh and he said he hasn't had to do it for anyone around here so I don't need it and then followed by saying he doesn't have the tooling for it, but he could do it but be ready to pay for the extra time.

That was a few months ago.

I talked to him recently. He is setup and able to do it. But it is expensive if that's all you getting. If your already getting a bore it's very cheap.

[sleepydsm]

Whats the point? Unless your head/block surface isn't very flat, a MLS should be more than enough.

But, you may be shooting for tractor-pull boost levels.

[tpunx99GSX]

Im surprised dsmers havent done this more often with the boost levels some of you are running.

[9guy9]

I've heard of shops in other parts of the country charging about $40 per cylinder.

[goodhart]

Blechinger Diesel, is the place that did Cody's motor. It is in Ham Lake. (763) 434-7050

[CarPsyco84]

Diesel shop for the win!