front motor mount in the way...

[CarPsyco84]

Just wondering if anyone out there makes a better mount or knows of a good fix for those of us with garrets/holsets with the oil return right into the front motor mount... I think this is a 1g AWD issue cause my 1g FWD theres lots of room... Ideas?

[blackrosenova400]

I had that same problem with my return not clearing the mount along with swift's problem of not clearing the compressor housing, it was really frustrating. I took my motor mount out and ground away at it with a carbide bit to allow clearance.

[turbotalon1g]

Grinder, sweat and swearing at it help lower the edge closest to the pan gave me enough room for -10AN line.
Having a fitting with angled threads helped a lot too.

[twack]

yup i gave it a lot of love with a grinder

[sleepydsm]

Cut a chunk off of it. Come on Mr. Do-It-Yourself!

[CarPsyco84]

Cut a chunk off of it. Come on Mr. Do-It-Yourself!

Heh, I was just wondering if there was some sweet trick I was obilvious to that everyone else was doing. I have a -10AN on there now and I had some smoking issues, but I have determined its the crankcase pressure that is causing the problems now.

[Super Bleeder!!]

I too had to grind down the motor mount. It suuuucked.