PDA

View Full Version : Want to buy brakes and hubs


Andrew7dg
01-27-2010, 08:55 AM
Just seeing what people have before I have to go to the U pull yard

Looking for
DSM
Front Hubs
Front Brake rotors
Front Brake calipers with hangers (big brakes if possible)

Rear hubs off of a FWD DSM
Rear brake rotors
Rear brake calipers with hanger

And by a slim chance does anyone have 4g csm Knuckle assembly

TurboDomestics
01-27-2010, 10:40 AM
1g or 2g? IM assuming 1g, but if you need 2g stuff PM me. Ive got all of that.

Andrew7dg
01-27-2010, 03:06 PM
1g stuff


Note
I have the 4g knuckle assembly now

Still looking for other stuff

awd-drifter
01-27-2010, 03:25 PM
i went to U Pull in Rosemount about a week ago and there was a 1g GSX there. When I was there, the trans, turbo, im, ic piping and most of the interior was gone. other than that, the rotors, calipers were still there.

TkrPerformance
01-27-2010, 04:23 PM
if you want to run disks on the back of the csm you will need the 3g csm set up 1g parts dont work with a ton of welding and custom fab.

Andrew7dg
01-27-2010, 05:45 PM
if you want to run disks on the back of the csm you will need the 3g csm set up 1g parts dont work with a ton of welding and custom fab.

Yeah just found this out...

Found a place to order the 3g sedan hubs though.

However can you use the brake setup from a 1g? AWD or FWD?

TkrPerformance
01-27-2010, 05:51 PM
you can use the dsm rotors and calapers fwd
but you will need the csm 3g disk brake brackets with out them you cant swap it over

Halon
01-27-2010, 06:02 PM
Damn just last week I finally threw away my whole front brake setup since I did the cobra upgrade. You're a week too late!!!

Andrew7dg
01-28-2010, 10:36 AM
you can use the dsm rotors and calapers fwd
but you will need the csm 3g disk brake brackets with out them you cant swap it over

Do you mean the hanger for the caliper or the bracket that holds the hanger?

89Mirageman will make a set of bracket to bracket to convert drums into disk. Or I will have to find a set from a mirage gt

http://i190.photobucket.com/albums/z285/89Mirageman/Picture653.jpg

which are sort of rare... to find. Mitsubishi doesn't make one anymore.
Unless you feel like fabricating some up?

Damn just last week I finally threw away my whole front brake setup since I did the cobra upgrade. You're a week too late!!!

NOO!!!!.... o well...
Someone else must have a set laying around from an upgrade. It is cold right now and I don't really want to go to u pull just yet. :beach: