View Full Version : WTB: 1g dsm parts
acidrumz
01-20-2010, 05:26 PM
can i use the driveshaft on my 90 even tho its off a 91+?
iirc, you will need a 91+ tranny/transfer case to mate with the 91+ driveshaft because of the spline count of the tc.
GREASEMONKEY
01-20-2010, 08:35 PM
iirc, you will need a 91+ tranny/transfer case to mate with the 91+ driveshaft because of the spline count of the tc.
Im pretty sure that the spline count on the driveshafts are all the same 90 - 94.
If you have a 1990 Tranny & X-Case and you want to switch over to a 91+ setup you will need to change your tranny and X-case but the driveshafts are the same 90-94.
I dont know if i misread your post or not but hopefully that clears up the confusion.
-Stephan
acidrumz
01-20-2010, 08:38 PM
Im pretty sure that the spline count on the driveshafts are all the same 90 - 94.
If you have a 1990 Tranny & X-Case and you want to switch over to a 91+ setup you will need to change your tranny and X-case but the driveshafts are the same 90-94.
I dont know if i misread your post or not but hopefully that clears up the confusion.
-Stephan
ok it must have been just the tc that has the different spline counts per 90/91+
thanks for clarification, so to the op, yes the driveshaft would fit.
93tsiawd
01-20-2010, 09:54 PM
ok i found a awd driveshaft out of a 93 n i also found a 91 awd tranny but i dnt thnk the transfer case is included
Wizard
01-21-2010, 12:47 AM
To use a 91-94 trans in your 90 you can do one of 2 things:
(1)swap the cables, and shifter assembly
(2)swap out the bracket on the transmission
89-90 T-cases are 22 spline input whereas 91+ are 23-spline. The outshafts of all T-cases are 21-spline (in other words the propshafts will interchange) Most driveshafts will fit into any 1g trans, awd/fwd/AT/MT doesn't matter.
To use a different t-case (ie, 22 T-case to 23 spline trans) you can simply swap out the output shaft from the transmission. Literally takes 15-20 mintues and doesn't require transmission removal. In other words, running a 91+ trans (23-spline) with a 90 T case (22 spline) just aquire a 22-spline output shaft (I keep 1 of each just for that reason)
Wiz
93tsiawd
01-21-2010, 09:26 PM
aight..i found a tranny..i just need a t case now..anyone got one?
Wizard
01-21-2010, 09:30 PM
Do you have any t-cases?
Wiz
93tsiawd
01-21-2010, 10:00 PM
no thats y im looking for one lol
Wizard
01-21-2010, 11:27 PM
Ok, I'm no help though since I only have 2 AT T-cases.
Wiz
GREASEMONKEY
01-23-2010, 03:21 PM
I have a 22 spline and a 23 spline x-case if your interested.. PM me if your interested
-Stephan
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.