PDA

View Full Version : Beater Eagle Summit

Pages : [1] 2 3
Andrew7dg
01-18-2010, 11:34 AM
So I just purchased what should be labeled a mirage from 1quick4
I will be using it as a DD for a while. I think this would be a great budget project.

http://www.mitsustyle.com/forums/attachment.php?attachmentid=6319&d=1190083478

My plan for this car is going to be in two phases

First phase is to just do small performance upgrade with parts that I have laying around. Starting with the suspension, I have a rear sway bar from my N/T Eclipse that I am sure would fit on the back.
The other Suspension upgrade I have heard was that a 1G AWD suspension would fit into this car. Can anyone confirm this or has done this mod yet?

It feels like this little car has the potential to handle. I don't want to lower it much, I am thinking Ice racing and rally crossing for right now till something major happens to the motor or transmission.

Motor is just the 4g15 with 4 on the floor. I am going to run it till something breaks. It may receive a N/T throttle body but thats about it...

*I am kind of sick of having project but not doing anything with them. I would like to have this be the opposite. I want to drive it and beat on it and have fun with it. I am sure this little hatch will be able to take it.

2nd Phase, eventually I will face the fact that the car should have be AWD. I have so many spare DSM parts laying around the place that it should be just a cheap project. (Meaning I am not going to stick very much money into the car in the first place)

I have the Hyundai Engine mount and the automatic transmission mount (however I don't think it uses the automatic transmission mount in the car)

I will probably need the axles from a Turbo mirage.

There is a Colt sitting at the U pull lot that has a hydraulic clutch. Should I pull the petal and the Master and slave clutch cylinder?

I also have a spare 3 bolt rear end out of my eclipse

http://i217.photobucket.com/albums/cc272/Andrew7dg/DSCN1888.jpg?t=1263831452

So if anyone has any helpful advice please feel free to add. I know some of you have more experience in the AWD swap department.
I just would like a complete list of what I am going to need and gather before I do the swap. I should have most of the parts laying around.

It has the satan badge on the back of it which now is its new nick name, plus it is red which makes it more funny...
Andrew7dg
01-18-2010, 12:28 PM
Added pictures

on snow bank

http://i91.photobucket.com/albums/k312/WhiskeyMinion/camera2008215.jpg

http://i91.photobucket.com/albums/k312/WhiskeyMinion/camera2008219.jpg
http://i91.photobucket.com/albums/k312/WhiskeyMinion/camera2008218.jpg
123abc
01-18-2010, 06:49 PM
I think the first order of business should be taking it to the ice!


I would pull the slave, master, lines, etc. from the other car. If you ever go 4g63, that 4 speed won't handle it and you'll go to a dsm setup. That means hydro clutch.

Not sure on the suspension part of it. I do think dsm springs work up front, but I have no idea about the rear.
4g63tcrazy
01-18-2010, 08:33 PM
Go to the AWD section on 4g61t.org. It should have all the info you will need.
C3L1CA
01-18-2010, 09:00 PM
That thing is a beast, it towed my 2g around DB when it had a nitrous back fire.

can't wait to see what you do with it.
TkrPerformance
01-18-2010, 09:36 PM
If you want to know anything on how to swap it let me know. I have done an awd swap to one of them before and have all the parts to swap the wifes this spring.

The awd sus will fit in the car. You need to use the oem rear springs on any awd shock that is good for 2in drop. For the front 90% of the guys cut 1 to 2 coils out of the spring with out the honda bonce problems.

If you want to go 4g63
90 dsm harness
Dsm tranny
Dsm 1/2 shaft
Mirage turbo axels. Dsm ones are to long
Any 1g tranny.
Turbo mirage front and rear roll stop mounts or mod dsm mounts. (I made the front one that did not come with the wifes car)
Tranny mount mirage turbo
Upper engine mount turbo mirage or mod a 1g mount.

I can go on about it but any way just ask me I will let you know what can be done on the cheap with dsm parts
1QUICK4
01-19-2010, 01:39 AM
That thing is a beast, it towed my 2g around DB when it had a nitrous back fire.

:lol:

It towed that S/C 3000GT too!

I always wanted to do something with it, just never any time or room anymore.

I've always had a feeling that the Scummit was destined for greatness.
Hopefully it likes it's new home.
Andrew7dg
01-19-2010, 03:38 PM
If you want to know anything on how to swap it let me know. I have done an awd swap to one of them before and have all the parts to swap the wifes this spring.

The awd sus will fit in the car. You need to use the oem rear springs on any awd shock that is good for 2in drop. For the front 90% of the guys cut 1 to 2 coils out of the spring with out the honda bonce problems.

If you want to go 4g63
90 dsm harness
Dsm tranny
Dsm 1/2 shaft
Mirage turbo axels. Dsm ones are to long
Any 1g tranny.
Turbo mirage front and rear roll stop mounts or mod dsm mounts. (I made the front one that did not come with the wifes car)
Tranny mount mirage turbo
Upper engine mount turbo mirage or mod a 1g mount.

I can go on about it but any way just ask me I will let you know what can be done on the cheap with dsm parts


If possible, put both cars in the same garage and do the swap at the same time!

ANYWAY...

The problem with the car is that it isn't the Turbo version so the motor mounts are going to be the hold up. I am probably going to have to make a couple but from what I heard some of the hyundai motor mount were the same as the turbo mirage. When I was at U pull I pulled most of the mounts off of the mirage and just have them in a box. Do you remember which ones work?

Where would be the best place to get the turbo mounts? Or just fab them up?

Other things on the list (trying to make it complete)

Shifter from a DSM? (currently a 4 speed)
Hydraulic clutch from a 5 speed? or can the cable clutch be modified?

I would love a tach in the car so I am checking all of the junkyards for one. However they are kind of rare...
TkrPerformance
01-19-2010, 04:25 PM
it will be getting the swap this spring some time. if you want to do it at the same time that will not be a problem if I have the extra room.

For the mounts you can just fab them up. It is not hard. Also realy not need the roll stop mounts if you go awd you can use dsm ones then sinse you need to get rid of the stock front to back roll stop brace. I can get you a part number for the upper engine mount.

On the hydro set up. Find a hatch or 4door 89-92 for the parts. For the shifter you can use the turbo mirage set up or a shifter out of a 93-95 mirage it has a shorter shifter in it and works really well. That is what I put in the wifes hatch.

For the others.
Just use a 90 dsm harness and make a harness adaptor to go from the dsm to mirage dash harness.

Also most of the guys on 4g61t are complety dumb and hack it together. The one guy to get the adaptor harness and motor mounts from is 89mirageman. He is a great guy he is also on the other mirage board mirageperformance.net. I have sold a lot of parts to him and bought and traded with him also.
If you want to know a lot about the car I would go to the mirageperformance board.
Andrew7dg
01-22-2010, 11:56 AM
Hey, I am not liking these front brakes....I have to change one of the broken lugs also

TKR I know you changed to a 5 lug, how did you deal with these front brakes?
I am thinking I am going to have to find a galant VR4 hubs or something. I would like to stay 4 lug.

I am going to leave the rear drums as is. When I swap to the AWD, those will have disks.

Besides the drums seem to work just fine with the hand brake:smile: