PDA

View Full Version : holset question

Pages : [1] 2
GnArKiLl
12-01-2009, 04:50 PM
what size is the thread for the oil feed on an hx35? i cant find it anywhere.
turbotalon1g
12-01-2009, 09:08 PM
12 x 1.5
GnArKiLl
12-01-2009, 10:31 PM
im trying to find a fitting that is 90deg with a 4-an on one side... and i cant find anything
turbotalon1g
12-02-2009, 07:12 AM
That might be tough.
Halon
12-02-2009, 09:43 AM
Yeah that might be tricky. Something to consider is juts getting a straight adapter fitting, and using that with a feedline that has a 90* -4an end on it. That's how mine is setup.
turbotalon1g
12-02-2009, 11:22 AM
same here, it will be ur best bet
sleepydsm
12-02-2009, 11:35 AM
I have a m12x1.5 to -4 an fitting. my oil line has a 90 built in.
The 92 Laser
12-02-2009, 10:29 PM
Go on Dsmtuners they have over like 2000 pages on Holsets. Including a specific one on how to run the oil feed. I plan on getting one when i get home from Iraq. Sorry dont mean to refer you to another site. I just know they have a lot of stuff on there about Holsets. Awesome turbos, put up numbers when she gets dynoed. Heres a link
http://www.dsmtuners.com/forums/turbo-system-tech/353498-holset-turbos-part-7-a.html
GnArKiLl
12-03-2009, 03:20 AM
Yeah that might be tricky. Something to consider is juts getting a straight adapter fitting, and using that with a feedline that has a 90* -4an end on it. That's how mine is setup.
that would work but i have to run an oil restrictor at the turbo. i think it will be to tall.
sleepydsm
12-06-2009, 12:31 PM
that would work but i have to run an oil restrictor at the turbo. i think it will be to tall.


I have an "Extreme PSi" oil feed line from the oil filter housing with a holset adapter fitting. I use an FP journal bearing restrictor.

I have the 90 degree fitting on the OFH, then the FP restrictor/filter attached, then the -4an line which goes to the a built in 90, then the M12x1.5 adapter on the turbo.