4seasons69, poor

[Halon]

The question is... does anyone here give a crap?

It's the Good Guy / Bad Guy Feedback forum, which is meant for exactly this.




Sorry to hear about the problems Randy, hopefully he makes it right. If I wasn't in Spain I woulda helped ya.

[sleepydsm]

OK, just tack the 30 dollars back on if you are unsatisfied. Isn't that the simpler solution? Im not saying thats fair for 4seasons. But eh you uys figure it out!

[tpunx99GSX]

Why didnt Viridion just take the master cyl out and rethread instead of buying a whole new master.
They are actually really easy to take out, (ive done about 15 of them), and if the threads were totally fucked, you can easily replace the rod only.

[Kracka]

It's the Good Guy / Bad Guy Feedback forum, which is meant for exactly this.
Exactly. If anyone else cares to post such comments they can join blackrose and fran on their vacation. This is the feedback section of the board meant for posting your experiences with other members, good, bad, or neutral. If you don't care then don't read threads from this section of the board.

[viridionplague]

Why didnt Viridion just take the master cyl out and rethread instead of buying a whole new master.
They are actually really easy to take out, (ive done about 15 of them), and if the threads were totally fucked, you can easily replace the rod only.

the 30 bucks plus the money he gave me that day covered what he owed me.

i tried pulling it out, it wouldnt budge for me, and since it was out, it was just easier to replace the whole cylinder.

also the new master came with the pivot arm, that needs to be replaced when i weld the pedal assembly, because right now i have a nut welded onto the end of mine

[blageo23]

Why dont you split it, $15. He did after all come TO YOU in your time of need and tried to help you. I think his gas and time is worth more then nothing. Just my $.02

[tpunx99GSX]

the 30 bucks plus the money he gave me that day covered what he owed me.

i tried pulling it out, it wouldnt budge for me, and since it was out, it was just easier to replace the whole cylinder.

also the new master came with the pivot arm, that needs to be replaced when i weld the pedal assembly, because right now i have a nut welded onto the end of mine

Uhmmm.. What? What is welded? or what are you welding?
There is a C clip that you have to take out in order to get the rod out. A bunch of the masters that i have replaced come with the wrong rod so you need to reuse the old rod, depending on which one you get. (the N/T ones are a different rod.)

[viridionplague]

Uhmmm.. What? What is welded? or what are you welding?
There is a C clip that you have to take out in order to get the rod out. A bunch of the masters that i have replaced come with the wrong rod so you need to reuse the old rod, depending on which one you get. (the N/T ones are a different rod.)

currently i have a nut welded onto the pivot arm on the clutch pedal for extra room to adjust, to account for slop, im going to have the clutch pedal assembly welded so there isnt any slop in it, hence no need for the extra nut.

the new master came with a new pivot arm and rod so i dont have to worry about having the wrong pieces

[4seasons69]

well from what i've heard this isn't the first time he's done something like this and likes to try and get as much as he can out of a person.



Why dont you split it, $15. He did after all come TO YOU in your time of need and tried to help you. I think his gas and time is worth more then nothing. Just my $.02

that sounds fair enough to me. consider what i've heard about him and the fact I wasted my time and gas so he could find out the threads were messed up I'll give him $15 take it or leave it

[turbotalon1g]

While I like to be fair as I can, I can honestly say I am disappointed in this wave of people that don't seem to want to do shit themselves.

Sadly my friend as I learned the hard way is that not all DSMers are nice guys.