Looking to make a T to measure Oil psi at turbo

[turbotalon1g]

I need a t or some contraption that will allow me to measure oil psi at the turbo.

The turbo fitting has to be a 12x1.5 fitting, i am using a 12x1.5 to -4an fitting with the -4an side milled and a nitrous jet as a restrictor so what ever T i come up with also has to accept a 12x1.5 fitting as to measure the oil psi after the restrictor.

Any ideas, just wondering because i ruptured my brain looking at industrial sites for fittings.

Thanks
Aaron

[v8klla]

If this works you owe me lunch ;)

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-OIL-030&Category_Code=GTBB

[turbotalon1g]

lol, nice try, but it doesn;t accept a 12x1.5 fitting.

[FattyBoomBatty]

Make an adapter. I'd think the pressure there wouldn't be very much since it's going from high pressure to very low (the drain tube).

[turbotalon1g]

um, thats where im needing the help sourcing the fittings

[sleepydsm]

Get an inline AN fiitting with some sort of female NPT fitting.

Basically, it'd go in line of your AN feed line, and has a NPT outlet and connect a gauge or whatever.

www.anplumbing.com

[turbotalon1g]

Thanks for the effort I found the perfect contraption for less than $15.