did something bad this afternoon

[TkrPerformance]

dad and I went out to u pull it and got some parts for the mirage coupe to get it done. Also ended up with a lot extra. Also dad cut his head open there taking some parts off the car.
http://i122.photobucket.com/albums/o280/tkrperformance/89%20mirage/DSC01229.jpg
http://i122.photobucket.com/albums/o280/tkrperformance/89%20mirage/DSC01230.jpg
http://i122.photobucket.com/albums/o280/tkrperformance/89%20mirage/DSC01231.jpg
just take a quess on what they will be installed on ;)

[john]

Looks like those belong on the 89 mirage with a large T4 turbo. Our initial plan was to go GT42 and AWD at some point.

[awd-drifter]

oh snaps! that mirage will be pretty crazy! awd mirage i sense.

[Halon]

Sweet!

[travail]

dad and I went out to u pull it and got some parts for the mirage coupe to get it done. Also ended up with a lot extra. Also dad cut his head open there taking some parts off the car.

http://i122.photobucket.com/albums/o280/tkrperformance/89%20mirage/DSC01231.jpg
just take a quess on what they will be installed on ;)
That looks almost like a rx7 fc rear end.

[TkrPerformance]

It is all out of a 91 galant. I just need to get a set of dsm rear hubs or will have to redrill them. It is all going to go into Ali's mirage hatch this comming spring. I going to fully rebuild the rear end. I have a 4bolt that has been sitting for a while so I will put that in with the stronger 3bolt ring and pinion. Put in all new bushings,sway bar,camber arms,and might do the toe elem kit