underhood wiring 1g

[DSM_brother2]

wats the best way to hide all the wiring and all the guage wiring stuff under the hood? i wanna make it clean but it seems like there is alot of wires! thanks

[Kevin 1G Drummer]

There are a lot of wires, and it will take a long time to do, but several people have done it, and it usually comes out nicely if you do it well enough.

[123abc]

wats the best way to hide all the wiring and all the guage wiring stuff under the hood? i wanna make it clean but it seems like there is alot of wires! thanks


What I did with my car was pull the engine harness out and drape it over the fender. Then procede to route the wireing back around only doing it lower and trying to hide them. There's a few things that do need to be grounded out, so make sure you make a good connection by sanding away some paint.

As far as the chassis wiring and the fusebox on the fender, thats a bit more work. You have to extend a few wires no matter which way you do it. You just gotta start unbolting it and seeing where everything goes and figure it out. Iti's pretty intuitive.

If you can stick through it, you'll have a very nice product:

http://www.mitsustyle.com/photopost/data/517/medium/SDC10590.JPG

[sleepydsm]

Just make your own harness!