PDA

View Full Version : Clutch Dropping


Pages : [1] 2

Khadgar
04-03-2004, 04:21 PM
I've heard that with an aftermarket clutch, it is normal for it to sometimes drop to the floor and has to be pulled up. I was letting my friedn drive and it happened to him, it was when making a right hand turn/going straight.

john
04-03-2004, 05:25 PM
Mine only did that when the clutch went out. I would check your fluid and make sure it is full. I haven't heard of the aftermarket clutch idea though.

Goat Blower
04-03-2004, 06:17 PM
It's not the clutch unless it's completely crapped out. Sounds more like a bad master cylinder or possibly the slave cylinder.

Jacek
04-03-2004, 07:05 PM
mine did that when i was bleeding it after installed a new clutch. sounds like somethings leaking.

Khadgar
04-03-2004, 07:19 PM
It's a new clutch and I don't have my SS line in, it's has only done this once, I was just curious to whether or not this is normal to happen every once in a while.

CVD
04-03-2004, 07:20 PM
:woowoo:

http://www.turbowill.dyndns.org/pics/DSM/crankwalk.jpg

blown_turbo_tsi
04-03-2004, 07:31 PM
it could happen! :goodluck:

Khadgar
04-03-2004, 07:58 PM
I made sure it wasn't a left hand turn...and if it walks, so be it.

Goat Blower
04-03-2004, 10:35 PM
Rebleed your master cylinder and all should be good.

JET
04-04-2004, 12:10 AM
Did you get the little locating sleeves back in the tranny? Is the tranny loose at all? They can both do that, don't ask me how I know!!