clutch went out already?

[DSM_brother2]

i have had this clutch i got from iceminion and he said it had alot of life yet. well i have gone at the most 1300 miles and it always slipped in 4th and 5th. now today it slipped in all 5 gears, and then went soft and i could shift, so i brought it home. is it because we could have put it in wrong or what could of happened?

[Halon]

what was your flywheel condition and step when you installed it?

[Shane@DBPerformance]

Clutch pedal might not be adjusted right.

[DSM_brother2]

the flywheel looked good. how could we adjust the pedal?

[twack]

looked good or was good

[123abc]

On the turbo flywheels it's very important to get the step right on. Non-turbo's not so much because of the way they're designed.

[96GST16g]

on the clutch assembly there has to be like a quarter inch of play before the clutch has pressuer on it there is a rod that goes to your mastercylendar that you can adjust it or u need to adjust your cruise control switch on the assembly

[DSM_brother2]

im gonna look into it this weekend after car craft. ill keep you posted

[Halon]

the flywheel looked good. how could we adjust the pedal?

That doesn't sound too reassuring.

As mentioned before, I would ensure the clutch pedal is adjusted right. If not and it still slips, then good chance that tranny will have to come back out.

[DSM_brother2]

i just tryed to adjust the clutch pedal and it didnt do anything. with the clutch pedal pressed and when i try to put it into gear it grinds. this means i need a clutch right?