PDA

View Full Version : FS: Buschur Deluxe FMIC + LICP


scheides
04-27-2009, 09:48 PM
Up for sale is my buschur deluxe FMIC kit. Comes with LICP and replacement turbo outlet pipe for a VIII turbo. $800 new, I'm looking for $600 obo. It's 2.5 years old but in perfect shape thanks to the nice factory mesh in the bumper. The inlet faces towards the back of the car, and runs under the radiator core support. It has a slight dent in it from a curb which should have no effect on performance but is worth noting. Could be bent straight with a pliers I'm sure. Just trying to be 100% honest about what I have here. No pics of that, sorry, as the FMIC is still on the car. Willing to yank it off for any serious buyer and ship once payment is received. No cutting required for install, just barely touches some of the factory mesh support bracketry. 2 seconds with a tin snips cleared it for me!

Anyways, on to the pics!

Here it is when I first got it, next to the stock FMIC:
http://www.scheides.com/albums/evo8/DSC00598.sized.jpg

http://www.scheides.com/albums/evo8/DSC00596.sized.jpg

Installed:
http://www.scheides.com/albums/evo8/DSC00620.sized.jpg

Now on to the current pics:
http://www.scheides.com/albums/evo-brdeluxefmic/IMG_0240.sized.jpg

http://www.scheides.com/albums/evo-brdeluxefmic/IMG_0241.sized.jpg

http://www.scheides.com/albums/evo-brdeluxefmic/IMG_0242.sized.jpg

http://www.scheides.com/albums/evo-brdeluxefmic/IMG_0243.sized.jpg

http://www.scheides.com/albums/evo-brdeluxefmic/IMG_0244.sized.jpg

High-res size pics available here:
http://www.scheides.com/gallery/evo-brdeluxefmic

goodhart
04-28-2009, 07:19 AM
Going bigger?

spinz4
04-28-2009, 11:40 AM
I'll have to think about this a little. Can you get a picture of the damage for me?

scheides
04-28-2009, 12:25 PM
The FMIC is still on the car, so I won't have a pic of that until its off. Imagine that instead of the inlet pipe being a perfect circle, there is about a 5mm dent on the very bottom most edge of the circle. Like I said, it is very minimal and should not affect performance at all. Should be able to bend it out with a pliers if you really want to.

If I take it apart, I'll snap a pic.

rocket2g
04-29-2009, 02:04 AM
had this one two 1g's back in the day, def. a good ass fmic

spinz4
05-16-2009, 07:13 PM
PM'ed you on EvoM let me know.