1G Roll Bar

[TwoTalons]

Looking for anything? Maybe trades?

Need a good short block. Preferably a 2.3/2.4.

[TwoTalons]

So could you just add door bars to this to make it an NHRA legal 6 point? Or would you have to weld it in also?

Wish I could help but I know nothing about NHRA rules. Don't see why it couldn't be modified to make it legal though.

The guy was road racing his car. Never ran it on the drag strip as fas as I know.

[Swifty1638]

for it to be legal, the cage MUST be welded. Bolt-in cages do not work.

[twack]

sold thanks keith

[TwoTalons]

sold thanks keith

Thank you!

[Halon]

for it to be legal, the cage MUST be welded. Bolt-in cages do not work.

That's not my understanding, unless something has changed from 08 to 09

This is taken right out of section 4:10 of the 2008 NHRA Rule Book:

Unibody cars with stock floor and firewall (wheeltubs
permitted) may attach roll bar with 6-inch x 6-inch x .125-inch
steel plates on top and bottom of floor bolted together with at
least four 3/8-inch bolts and nuts

[Goat Blower]

I think the diameter and wall thickness is a bit light for NHRA as well, I can't remember anymore. I know that you need larger diameter tubing when using mild steel than the autocross guys use.