PDA

View Full Version : Need a fitting turned/cut flat.

turbotalon1g
03-19-2009, 04:44 PM
Need to do this:
http://www.dsmtuners.com/forums/articles-turbo-system-intercooler/171317-how-make-your-own-oil-restrictor-garrett-channel-bearing-non-bb-turbos.html
Pushit2.0
03-19-2009, 10:09 PM
$10 bucks, or I might have a left over PTE restrictor, I will look tonight.

~John
s1ngletracker
03-19-2009, 11:53 PM
Yeah, why not just use another type of restrictor?
asshanson
03-20-2009, 02:54 AM
Just get the FP red colored filter? I know it costs a bit but it also restricts/filters...

Or if you're going ball bearing get a fitting that has the pinhole opening for $12.
turbotalon1g
03-20-2009, 08:08 AM
It has been found that the orifice on the FP restrictors are not all what they advertise. Also the orifice is too big on FPs restrictor and i would get one of the those flanges with a restrictor in it, but my turbo doesn't have bolt holes for it.

The other option is to feed from the head.
scheides
03-20-2009, 05:53 PM
Rosey has a lathe at work.
MustGoFaster
03-20-2009, 06:27 PM
At work we typically just drill and tap. Thread in a set screw and drill any size orifice you want. But drilling set screws can be a bit of a PITA since they are hardened.
turbotalon1g
03-20-2009, 08:38 PM
in hot it done thx. kyle at map
munchgsx
03-21-2009, 12:08 AM
^Dude mabye not so much vicadin