Super Bleeder!!
03-15-2009, 11:16 PM
Was an amazing Friday for the Turd. Went to the track to just have some fun and never planed to set any records. I did have a running bet with TJ that I would beat his 9sec CRX due to the fact that he probably could no hook up on the fresh cold track. I had totally planed on him beating the Turd so I could pay for his night of racing. Friday the 13th must be good luck since I ran my 9.6 to TJ's best of a 10.2@148. Was only $20 on the line.
We also had a PRE dyno day and the Turd took the highest HP AWD and Boosted class. Put down 667whp on a Dyno Dynamics.
Mods that matter
-11:1 Alum rod motor English Racing Built
-Forced Performance FP3065 turbo with V-band 44mm gate and 3in O2 housing
-3in sleeper TBE
-Ported head done by Jeff Bush
-Kiggly beehive valve springs
-FP2 Cams
-JMF sheet metal intake
-ETS 4in FMIC with 2.5in lower piping and 3in upper
-MAFT Translator with 3.5in GM MAF with no Honey comb
-DSM link for tuning
-RC 1600cc injectors
-twin 255hp pumps with Aeromotive regulator -6 supply and return
-English Racing Built trans with dbl cone 2-4 welded ctr diff
-QM twin disc
Was not able to get a copy of the 9.6 slip due to the car and I not being leagle to run the times. PIR really likes to bust my balls.
Was amazing that I got to back the pass up since the 1/8mi was not working right on my 9.8pass. I was letting off jus into 4th since I could not go over 135mph. The 9sec pass were a total surprise to me.
Shifted @ 9200
Fuel was E80/VP import blend
http://www.youtube.com/watch?v=gLFqSYX67RU&feature=channel_page
We also had a PRE dyno day and the Turd took the highest HP AWD and Boosted class. Put down 667whp on a Dyno Dynamics.
Mods that matter
-11:1 Alum rod motor English Racing Built
-Forced Performance FP3065 turbo with V-band 44mm gate and 3in O2 housing
-3in sleeper TBE
-Ported head done by Jeff Bush
-Kiggly beehive valve springs
-FP2 Cams
-JMF sheet metal intake
-ETS 4in FMIC with 2.5in lower piping and 3in upper
-MAFT Translator with 3.5in GM MAF with no Honey comb
-DSM link for tuning
-RC 1600cc injectors
-twin 255hp pumps with Aeromotive regulator -6 supply and return
-English Racing Built trans with dbl cone 2-4 welded ctr diff
-QM twin disc
Was not able to get a copy of the 9.6 slip due to the car and I not being leagle to run the times. PIR really likes to bust my balls.
Was amazing that I got to back the pass up since the 1/8mi was not working right on my 9.8pass. I was letting off jus into 4th since I could not go over 135mph. The 9sec pass were a total surprise to me.
Shifted @ 9200
Fuel was E80/VP import blend
http://www.youtube.com/watch?v=gLFqSYX67RU&feature=channel_page