Injector Size?

[cman3000]

Right now I have 780cc FIC injectors but i am switching over to e85 and getting link instead of the keydiver chip i have now. My goal is around 450 at the wheels and my question is this: If i get 1000cc injectors will i be maxing them out? Also, is RC or FIC better than PTE when it comes to injectors? I have looked and found differing opinions on other forums, but i am interested in what you guys say.

[4g63tcrazy]

I am running 950cc's right now at only 40% IDC around the 400hp range. I'm sure 1000cc's will be plenty for you.

[jhaan_dude]

i have a set of 880cc for sale :)

[JET]

I am running 950cc's right now at only 40% IDC around the 400hp range. I'm sure 1000cc's will be plenty for you.

I call bullshit unless you have the fuel pressure cranked way up, which is dumb.

What dyno are you shooting for 450whp on, DD or DJ? 1000's on E85 and DD aren't going to cut it.

[Swifty1638]

what turbo?

-A. Swift

[carltalon]

What fuel? 1000cc's would be fine for Gasoline not E85.

I made 481 HP Dynodynamics with E85 and 850's but it wasnt even close to safe.

[turbotalon1g]

My FIC 950s are around 70% at most at 410hp on a DJ.
Supposed to be plenty for about 42lb/min at 80% and 52lb/min at 100%

[cman3000]

Turbo is a Bullseye Performance T04b 50 trim and im shooting for 450 on a DJ

[turbotalon1g]

FIC 950s should be good then. Maybe 880s but I think that might be close.

[cman3000]

So i would asume PTE 1000's should work fine then