View Full Version : FMIC question
slowboy101
09-29-2008, 12:49 AM
if I get a FMIC do I have to get a new radiator and fan or can I use the stock one?
Constant_Project21
09-29-2008, 12:55 AM
You can use the stock fans and radiator, they don't have anything to do with a front mount. It is tough running the turbo to inlet on a front mount on 1g's but it does fit.
slowboy101
09-29-2008, 12:58 AM
alot of dsm gods I know were saying i HAVE to get a slim fan
Constant_Project21
09-29-2008, 01:13 AM
You don't HAVE to. It makes it way easier, but I made mine work on my Laser. Then again we did a lot of custom fab, and I wanted to keep my power steering and a/c so I did a different routing on my turbo to inlet.
Kracka
09-29-2008, 06:51 AM
Stock radiator is fine, but you may need to get some slim fans.
scheides
09-29-2008, 09:48 AM
If the stock one fits, keep it. Otherwise, two 10" or 12" push fans mounted inbetween the FMIC and the radiator are always a nice solution. Last thing you want is to overheat your car.
scheides
09-29-2008, 10:13 AM
Also, I had a Flex-A-Lite FAL dual fan setup on my 2G that was freaking awesome. It mounted on the engine side, but man it did a good job.
slowboy101
09-29-2008, 03:21 PM
K thanks guys
asshanson
09-29-2008, 03:35 PM
I was using the two stock fans with my FMIC until I went to an external wastegate, then I had to remove the AC fan and just recently installed a pusher on that side.
slowboy101
10-02-2008, 01:06 AM
k thanks alot man
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.